静电纺丝制备锂离子电池用聚氨酯/有机硅复合隔膜
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

安徽省高校自然科学研究项目(KJ2017A031)


Preparation by Electrospinning Technique and Electrochemical Performance of Polyurethane/Silicone Separators
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚氨酯与有机硅为原料,采用高压静电纺丝法制备了系列聚氨酯/有机硅复合纤维隔膜,通过傅里叶变换红外光谱及扫描电子显微镜等表征了纤维膜的结构、形貌与力学性能。结果表明,当有机硅加入量为10%时,纤维膜的拉伸强度达到10.1MPa,孔隙率为60.9%,吸液率高达428.7%,25℃离子电导率达到最佳值4.5×10-3 S/cm。以该隔膜组装成LiFePO4/Li电池测试,电流密度为0.2C时首次放电容量为152.8mA·h/g,1C循环100次放电容量依旧能保持在135.2mA·h/g,容量保持率为99.2%,显示出较好的循环稳定性。

    Abstract:

    Nanofibrous membranes based on thermoplastic polyurethane (PU) doped with silicone were prepared by an electrospinning technique and the corresponding composite gel polymer electrolytes (GPEs) were obtained after activation in liquid electrolyte. Their morphology characteristics and structure were systematically investigated by scanning electron microscopy (SEM),Fourier transform infrared spectroscopy (FT-IR), thermal analysis (TGA), galvanostatic charge-discharge and electrochemical impedance spectroscopy. The GPE based on PU/DC51-10% shows a high porosity and electrolyte uptake of 60.9% and 428.75%,high ionic conductivity of 4.52×10-3 S/cm at 25 ℃,and a first discharge capacity of 152.8 mA·h/g which is about 99.2% of the theoretical capacity of LiFePO4. When the PU/DC51-10% film charging and discharging 100 times at 1 C,the film still has stable discharge capacity of 135.2 mA·h/g. The PU/DC51-10% films present superior electrochemical and mechanical performances, which are very promising for application in polymer lithium ion batteries.

    参考文献
    相似文献
    引证文献
引用本文

高明昊,罗 珍,鲍俊杰,陶 灿,程 芹,许戈文,黄毅萍,朱 林,吴树凡.静电纺丝制备锂离子电池用聚氨酯/有机硅复合隔膜[J].高分子材料科学与工程,2018,34(10):116-121. Minghao Gao, Zhen Luo, Junjie Bao, Can Tao, Qin Cheng, Gewen Xu, Yiping Huang, Lin Zhu, Shufan Wu. Preparation by Electrospinning Technique and Electrochemical Performance of Polyurethane/Silicone Separators[J]. Polymer Materials Science & Engineering,2018,34(10):116-121.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司