高官能度聚氨酯丙烯酸酯的设计制备及光固化性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金面上项目(51373129)


Design and Preparation of Multifunctional Polyurethane Acrylate and Its UV-Curing Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了提高树脂的光固化活性,以不同官能度的苯酐聚酯多元醇(PAPP)为核,异佛尔酮二异氰酸酯(IPDI)和季戊四醇三丙烯酸酯(PET3A)为支设计制备了一系列高官能度聚氨酯丙烯酸酯。将其与活性稀释剂、光引发剂复配,通过紫外光(UV)固化,得到树脂浇铸体。用红外光谱、UV固化机、万能材料试验机、动态力学热分析仪及同步热分析等对光固化树脂及其浇铸体的结构、活性、力学及热学性能等进行测试分析。结果表明,合成了预期结构的聚氨酯丙烯酸酯,当其碳碳双键官能度从6增加到12时,树脂湿膜(100μm)光固化时间从21s下降至18s;树脂浇铸体弯曲与拉伸性能呈上升趋势,冲击韧性则有所降低;Tg 从135℃上升到147℃,耐热性能变好。

    Abstract:

    To improve the photosensitivity of the resin, a series of multifunctional polyurethane acrylate (PUA) were synthesized by using phthalic anhydride based polyester polyol (PAPP) as core and isophorone diisocyanate (IPDI), pentaerythritol triarylate (PET3A) as branch. The preparation of the UV-cured PUA resin casting was divided into two steps. The first step was mixing active diluent, photoinitiator and the resin in a specific proportion, and the second step was UV illumination. The molecular structures of resultant PUA, the photosensitivity of the PUA resins, the mechanical properties and thermal properties of the UV-cured resin castings were investigated by FT-IR, UV solidifying machine, universal material testing machine, dynamic thermomechanical analysis (DMA) and simultaneous thermal analysis (STA). The results show that, the structure of PUA is identified, and with increase of the functionality from 6 to 12, the curing time of wet film (100 μm) decreases from 21 s to 18 s, which indicates the photosensitivity of the resin gets larger, and the bending properties, tensile properties of the UV-cured PUA become better, while the impact strength decreases, and thermal stability gets better, where Tg increases from 135 ℃ to 147 ℃.

    参考文献
    相似文献
    引证文献
引用本文

董文静,段华军,陶晓晓,汪 鑫.高官能度聚氨酯丙烯酸酯的设计制备及光固化性能[J].高分子材料科学与工程,2018,34(10):129-134. Wenjing Dong, Huajun Duan, Xiaoxiao Tao, Xin Wang. Design and Preparation of Multifunctional Polyurethane Acrylate and Its UV-Curing Properties[J]. Polymer Materials Science & Engineering,2018,34(10):129-134.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司