利用超临界二氧化碳制备聚己内酯/聚乙二醇多孔支架材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51373103);四川省科技厅国际合作项目(2015HH0026)


Preparation of Porous Tissue Engineering Scaffolds by Supercritical Supercritical Carbon Dioxide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用超临界二氧化碳技术与聚合物共混相结合的方法,制备了组织工程多孔支架。通过熔融共混的方法制备具有共连续结构的聚己内酯/聚乙二醇(PCL/PEG)共混物,在超临界二氧化碳中对PCL/PEG共混物进行粗化处理,最后选择蒸馏水作为刻蚀溶剂选择性刻蚀得到多孔支架。系统研究了温度、压力、时间对支架孔径的影响。实验结果表明,随着处理温度、压力的提高以及时间的延长,多孔支架的孔径增大。由于超临界二氧化碳的引入,可以在更低温度下实现PCL/PEG共混物的退火处理,有利于降低材料的降解。并且由于选用了水溶性聚合物作为刻蚀相,在支架的制备过程中完全避免了有机溶剂的使用。

    Abstract:

    Porous poly(ε-caprolactone) (PCL) scaffolds of almost fully interconnected pores were successfully prepared by extracting the polyethylene glycol (PEG) phase from co-continuous PCL/PEG blends. The PCL/PEG blends which has co-continuous phase structure, were subjected to static annealing process in supercritical carbon dioxide (scCO2) and selective extraction. It is found that the PCL/PEG blend undergo a significant coarsening process in scCO2. Moreover, the low temperature in the presence of scCO2 is to the benefit of maintaining the mechanical properties of the scaffolds. The scaffold structure could be tailored by careful control of coarsening condition, such as temperature, pressure, time. In addition, the preparation of scaffold is organic solvent free preparation for the reason that PEG is water-soluble polymer.

    参考文献
    相似文献
    引证文献
引用本文

叶建刚,黄二波,廖 霞.利用超临界二氧化碳制备聚己内酯/聚乙二醇多孔支架材料[J].高分子材料科学与工程,2018,34(10):165-171. Jiangang Ye, Erbo Huang, Xia Liao. Preparation of Porous Tissue Engineering Scaffolds by Supercritical Supercritical Carbon Dioxide[J]. Polymer Materials Science & Engineering,2018,34(10):165-171.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司