含碳癸硼烷氰酸酯树脂及其复合材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51273006)


Synthesis and Properties of Carborane-Containing Dicyanate Ester Resin and Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成了1,2-二(4-异氰酸酯基苯基)碳癸硼烷(BCE),用红外光谱和核磁共振(1H-NMR和13C-NMR)表征其结构。研究了BCE氰酸酯树脂的固化特征温度、流变性能和热稳定性能,并考察了其石英纤维增强复合材料的耐热性能和介电性能。结果表明,BCE氰酸酯树脂适合于模压和热压罐等复合材料成型工艺。固化后的树脂玻璃化转变温度不低于500 ℃,在氮气和空气中5%失重温度分别为491.9 ℃和465.9 ℃,800 ℃残留率分别为91.9%和90.3%。在7~19 GHz频率下,石英纤维增强BCE树脂复合材料具有较低且稳定的介电常数和介电损耗正切值。

    Abstract:

    1,2-Bis(4-isocyanate phenyl) carborane(BCE) was synthesized and characterized by FT-IR, 1H-NMR and 13C-NMR. The curing temperature, processing property, and thermal stability of the BCE resin were studied. Then based on the BCE resin, the heat resistance and the dielectric property of the quartz fiber reinforced composites were also researched. The results show that the BCE resin is suitable for compression molding and autoclave molding processing. The glass-transition temperature of cured BCE resin is higher than 500 ℃. The 5% mass loss temperature of the cured BCE resin in nitrogen or air is 491.9 ℃ and 465.9 ℃ respectively, and the coke residues rate at 800 ℃ is 91.9% and 90.3% respectively. The dielectric constant and the dielectric loss of the quartz fiber reinforced composites are low and stable at 7~19 GHz.

    参考文献
    相似文献
    引证文献
引用本文

冯晨, 邱银, 王世超, 陈功.含碳癸硼烷氰酸酯树脂及其复合材料的制备与性能[J].高分子材料科学与工程,2018,34(11):32-36. Chen Feng, Yin Qiu, Shichao Wang, Gong Chen. Synthesis and Properties of Carborane-Containing Dicyanate Ester Resin and Composites[J]. Polymer Materials Science & Engineering,2018,34(11):32-36.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司