盐酸小檗碱在皮芯氨纶纤维中的负载与释放
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项资金(YJ201726);四川省科技厅重点研发项目(18ZDYF1328);金山区专利新产品项目(2016-ZLXCP-01);川大-泸州战略合作科技项目(2017CDLZ-S01);2017年度扬州市“绿扬金凤”优秀博士项目


Loading and Release of Berberine Chloride Hydrate from Core-Shell Polyurethane Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用皮芯湿法纺丝技术制备了包载盐酸小檗碱(BCH)为模型药物的氨纶纤维,分别通过扫描电镜、热重分析、差示量热扫描、单纱强力、白度、接触角测试表征和分析了纤维的形貌结构、药物分布、热/力学性能、白度及亲疏水性能。并针对氨纶纤维所包载的BCH 进行了体外释放行为追踪。结果表明,皮芯湿法纺纤维成型良好,具有明显的皮芯结构,且BCH 以无定形形式分布于纤维中。同时,研究发现,BCH 的引入显著改善了纤维的热稳定性能,其热分解温度提高70 ℃以上,同时也增强了纤维表面的亲水性能,其中皮芯层均负载BCH 的氨纶纤维表现为亲水性,接触角小于90°。此外,体外药物释放实验证实,在释放15h时,仅芯层负载BCH 的氨纶纤维(释放了~30%)相比皮芯层均负载BCH 的氨纶纤维(释放了~50%)有较好的药物缓释效果。

    Abstract:

    Berberine chloride hydrate (BCH)-loaded polyurethane fibers were prepared through core-shell wet-spinning technology. The structure, surface morphologies, drug contribution, thermal and mechanical properties, whiteness, hydrophilicity were characterized by SEM, TGA, DSC, electronic yarn strength, whiteness tester and contact angle tester. In vitro drug release test was performed to investigate the drug release behavior. The results show that core-shell polyurethane fibers are successfully obtained, and BCH randomly deposit inside the core parts. Meanwhile, the incorporation of BCH significantly improves the thermal stability, and the maximum thermal decomposition temperature of the composite fibers increases by more than 70 ℃. Additionally, the hydrophilicity of polyurethane fibers is enhanced, and the fibers with BCH imbedded in both core and shell parts are more hydrophilic presented by lower water contact angle (<90°). More importantly, in terms of long-lasting and controlled release, the fibers with BCH imbedded in core part (release ca. 30%) show better performance compared with those imbedded in both core and shell parts (release ca. 50%).

    参考文献
    相似文献
    引证文献
引用本文

唐佳敏, 郑威, 赵瑞方, 银学谦, 施亦东, 朱勇, 谭淋.盐酸小檗碱在皮芯氨纶纤维中的负载与释放[J].高分子材料科学与工程,2018,34(11):49-55. Jiamin Tang, Wei Zheng, Ruifang Zhao, Xueqian Yin, Yidong Shi, Yong Zhu, Lin Tan. Loading and Release of Berberine Chloride Hydrate from Core-Shell Polyurethane Fibers[J]. Polymer Materials Science & Engineering,2018,34(11):49-55.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司