丙烯腈-丁二烯-苯乙烯/甲基乙烯基硅橡胶共混体系的动态硫化及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Properties of Dynamic Vulcanized Acrylonitrile Butadiene Styrene/Methyl Vinyl Silicone Rubber Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了动态硫化对丙烯腈-丁二烯-苯乙烯/甲基乙烯基硅橡胶(ABS/MVQ)共混体系性能的影响,讨论了不同含量硫化剂对ABS/MVQ共混物流变性、耐热性、力学性能和微观结构的影响。结果表明,动态硫化使共混体系黏度增大,流体假塑性增强,流动性下降;在一定范围内,随着硫化剂2,5-二甲基-2,5-双(叔丁基过氧化)己烷(DHBP)用量的增大,共混体系的耐热性和力学性能表现出先增大后减小的趋势;动态硫化使ABS/MVQ 体系的相容性变好,成炭量增加;当硫化剂含量为0.04%时,ABS/MVQ体系综合性能最好。

    Abstract:

    The effects of dynamic vulcanization on the properties of acrylonitrile butadiene styrene / methyl vinyl silicone rubber (ABS/MVQ) blends were studied and the effects of different curing agent contents on the rheological properties, heat resisting properties, mechanical properties and microstructure of the ABS/MVQ blends were also discussed. The results show that the dynamic vulcanization increases the viscosity of the blends, the fluid pseudo-plasticity increases, and the fluidity decreases. The heat resisting properies and machanical properies of the blends show trend of increasing first and then decreasing with increase of the using amount of curing agent (2,5-dimethyl-2,5-bis (tert-butyl peroxide) hexane) in a certain range. Dynamic vulcanization improves the compatibility of ABS/MVQ blends and increases the carbon content. When the amount of curing agent is 0.04%,the comprehensive properties of ABS/MVQ blends are the best.

    参考文献
    相似文献
    引证文献
引用本文

崔永岩, 朱晓蒙, 杨翰, 高文敬, 段盛元.丙烯腈-丁二烯-苯乙烯/甲基乙烯基硅橡胶共混体系的动态硫化及性能[J].高分子材料科学与工程,2018,34(11):74-78. Yongyan Cui, Xiaomeng Zhu, Han Yang, Wenjing Gao, Shengyuan Duan. Properties of Dynamic Vulcanized Acrylonitrile Butadiene Styrene/Methyl Vinyl Silicone Rubber Blends[J]. Polymer Materials Science & Engineering,2018,34(11):74-78.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司