硅-磷阻燃剂对热塑性聚氨酯弹性体阻燃性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Silicon-Phosphorus Flame Retardants on Performances of Polyurethane Elastomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用一种含硅阻燃剂———笼形八苯基硅倍半氧烷(OPS)与含磷阻燃剂聚磷酸铵(APP)或二乙基次膦酸铝(ADP)复配制备了阻燃热塑性聚氨酯弹性体(TPU)。结果表明,OPS对TPU 的热稳定性有一定的影响,当OPS的质量分数为15%时,能明显改善燃烧过程中的熔滴现象;OPS/APP和OPS/ADP复合阻燃体系,均可以大幅提升TPU 的阻燃性能,且APP效果要明显优于ADP;TPU/10%OPS/5%APP体系的综合性能最优,热释放速率峰值从1339 kW/m2 降低至489 kW/m2,降幅达到了63.5%,总烟释放量也从3425 m2/m2 降到1884 m2/m2,降幅达到了45.0%;燃烧残余量为18%,锥量测试后的炭层更加致密、坚硬。

    Abstract:

    The silicon-based flame retardants, polyhedral oligomeric silsesquioxane(OPS), were added to polyurethane elastomer. And it is found that OPS has some influence on the thermal stability of polyurethane elastomer (TPU), and when the mass fraction of OPS is 15%, it can significantly decrease the phenomenon of molten drops in the process of combustion. Then OPS is mixed with ammonium polyphosphate (APP) and diethyl phosphonic acid aluminum (ADP) respectively, the flame retardancy of TPU/OPS/APP and TPU/OPS/ADP composite can be improved dramatically. APP is significantly superior to ADP. The comprehensive performance of TPU/10%OPS/5%APP system is the best, while the peak of heat release rate is reduced from 1339 kW/m2 to 489 kW/m2,the reducing range amounts to 63.5%, and the total smoke emission is reduced from 3425 m2/m2 to 1884 m2/ m2,the reducing range amounts to 45.0%, and the residual mass is 18%. The carbon layer of the TPU/OPS/APP system after cone test is more dense and hard.

    参考文献
    相似文献
    引证文献
引用本文

周陆陆, 杜建新, 杨荣杰.硅-磷阻燃剂对热塑性聚氨酯弹性体阻燃性能的影响[J].高分子材料科学与工程,2018,34(11):79-85. Lulu Zhou, Jianxin Du, Rongjie Yang. Effect of Silicon-Phosphorus Flame Retardants on Performances of Polyurethane Elastomer[J]. Polymer Materials Science & Engineering,2018,34(11):79-85.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司