聚乙烯管材耐慢速裂纹增长性能的快速评价的研究现状
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省省级科技计划项目(2017A040403058);广州市科技计划项目(201607010258);广东省质量技术监督局科技项目(2017CT15);广东省质量技术监督局科技项目(2016CT14)


Tests for Slow Crack Growth Failure in Polyethylene Pipes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚乙烯(PE)管材的耐慢速裂纹增长性能是评价管材使用寿命的关键指标。文中概述了塑料管材典型的破坏模式,介绍了常规评价聚乙烯管材耐慢速裂纹增长性能的切口管试验(NPT)、全切口拉伸蠕变试验(FNCT)、宾夕法尼亚切口拉伸试验(PENT)、锥体试验(Cone)等试验方法;详细介绍了最新研发的变硬化模量法、缺口圆柱棒-循环载荷法2种新型试验方法,并比较分析了新型试验方法的优势。最后就聚乙烯管材耐慢速裂纹增长性能评价方法的发展方向进行了展望。

    Abstract:

    The slow crack growth (SCG) performance of polyethylene (PE) pipe is a key indicator for evaluating the service life of pipe. The typical failure mode of plastic pipe was briefly summarized. The conventional slow crack growth (SCG) characterization methods of notched pipe test (NPT), full notch creep test(FNCT), Pennsylvania notch test (PENT), the cone test (Cone) etc were introduced. Two new methods of strain hardening modulus and cracked round bar were emphatically described, and the advantages of new methods were compared with conventional methods. Development of SCG test methods was presented at the end of the paper.

    参考文献
    相似文献
    引证文献
引用本文

翟伟, 杨波, 李茂东, 黄国家, 张术宽, 王志刚.聚乙烯管材耐慢速裂纹增长性能的快速评价的研究现状[J].高分子材料科学与工程,2018,34(11):175-182. Wei Zhai, Bo Yang, Maodong Li, Guojia Huang, Shukuan Zhang, Zhigang Wang. Tests for Slow Crack Growth Failure in Polyethylene Pipes[J]. Polymer Materials Science & Engineering,2018,34(11):175-182.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司