耐高温两性离子聚合物压裂液的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国石油集团公司项目(2013E-38-07 );高分子材料工程国家重点实验室自主课题(sklpme2015-2-06)


Preparation and Properties of Amphoteric Polymer Fracturing Fluid
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为获得性能优良的高温低伤害聚合物压裂液,采用丙烯酸、丙烯酰胺和阳离子单体为原料合成了成本较低的含羧基的两性离子共聚物压裂液稠化剂PADA,制备了配套的功能性有机钛交联剂TRGWY,在此基础上构建了高温低伤害酸性聚合物压裂液,研究了该压裂液的性能及其影响因素。研究结果表明,PADA具有良好的增黏能力,可在酸性条件下与TRGWY交联形成聚合物冻胶。压裂液的性能与稠化剂结构、压裂液组成和pH值有关。阳离子单体与阴离子单体摩尔分数为5%时所得产物的综合性能较好;组成为0.6% PADA +1.5% TRGWY的压裂液(pH=3~4)具有良好的耐温抗盐性能及破胶性能,可耐温200 ℃以上,经180 ℃、170 s-1恒温剪切90 min后的黏度仍大于60.0 mPa·s,可满足高温油气井压裂施工需要。

    Abstract:

    In order to formulate the fracturing fluid with excellent temperature-resistance and low damage to the reservoir, the low cost amphoteric polymer thickener PADA containing carboxylic groups was designed and synthesized by acrylic acid, cationic monomer and acrylamide. The functional organic titanium crosslinker TRGWY was prepared. The performance and influence factors of the fracturing fluid formulated from PADA and TRGWY were evaluated and explored. The results show that the PADA exhibits good viscosifying ability, and can be used to make a polymer gel with TRGWY through the cross-linking reaction under acidic condition. The performance of the fracturing fluid is related to the structure of PADA,the composition of fracturing fluid and the pH value. The optimized PADA is obtained when the molar farction of anionic monomer and cationic monomer is both 5%. The fracturing fluid which is composed of 0.6% PADA and 1.5% TRGWY ( pH=3~4) possesses an excellent performance of high temperature tolerance, salinity tolerance and gel-breaking property, and the temperature-resistant is up to 200 ℃, the final viscosity of the fracturing fluid is above 60 mPa·s after continuously shearing for 90 min at 180 ℃,170 s-1, which could meet the requirements of fracturing construction in oil and gas wells at high temperature.

    参考文献
    相似文献
    引证文献
引用本文

李美平, 邹 琴, 周 瀚, 罗 辉, 何启平, 蔡远红, 鲍 晋, 徐婷婷, 张 熙.耐高温两性离子聚合物压裂液的制备与性能[J].高分子材料科学与工程,2018,34(12):7-12. Meiping Li, Qin Zou, Han Zhou, Hui Luo, Qiping He Yuanhong Cai, Jin Bao, Tingting Xu, Xi Zhang. Preparation and Properties of Amphoteric Polymer Fracturing Fluid[J]. Polymer Materials Science & Engineering,2018,34(12):7-12.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司