Abstract:Anatase type nano-TiO2 was prepared by sol-gel method, and graphene oxide was prepared by modified Hummers method, then nano-TiO2/graphene composites were synthesized by hydrothermal method. Using isophorone diisocyanate and polyethylene glycol 1000 as reaction monomer, dibutyltin dilaurate as catalyst, dimethylol propionic acid as chain extender and methacrylic acid hydroxyethyl ester-terminated, the waterborne polyurethane prepolymer was prepared. Polyurethane coated with different mass fraction of TiO2/graphene composites was prepared by adding TiO2/graphene composites into the polyurethane system. SEM, XRD, FT-IR, and UV-Vis spectroscopy were used to analyze the morphology, composition, structure and photocatalytic degradation of composites. The results show that TiO2/graphene composites show good photocatalytic performance. The degradation rate of methyl orange reaches 77.20% for 24 h under ultraviolet irradiation, which is better than that filled with pure TiO2. The degradation rate of TiO2/graphene to methyl orange is 57.52% under visible light condition, while pure TiO2 has little degradation ability. Mechanical properties of polyurethane coatings modified with TiO2/graphene composites are improved in various degrees.