增韧导热氰酸酯树脂基复合材料的制备及其性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省自然科学基金资助项目(E2016202036);国家自然科学基金资助项目(51573037)


Preparation and Properties of the Cyanate Ester Composites with High Thermal Conductivity and Toughness
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用种子乳液聚合方法制备了聚丙烯酸丁酯/聚(甲基丙烯酸甲酯-co-丙烯酰胺)(poly(BA)/poly(MMA-co-AM)),简称PBMAM核/壳结构共聚物;采用水热法对六方氮化硼(h-BN)进行表面改性,简称ABN;随后采用熔融共混法将PBMAM和ABN与氰酸酯树脂(CE)制得CE/PBMAM/ABN复合材料,研究了ABN用量对增韧氰酸酯复合材料性能的影响。结果表明,随着ABN含量的增加,复合材料的导热、热稳定性和力学性能均有提高。当PBMAM添加量为5%,ABN为8%时,复合材料的导热系数为纯树脂的2.4倍,冲击强度和弯曲强度比纯氰酸酯树脂的分别提高了2.8倍和1.7倍,复合材料的10%热分解温度提高了50 ℃。

    Abstract:

    The core-shell structured polymer, poly(butyl acrylate)/poly(methyl methacrylate-co-acrylamide), named as PBMAM was prepared by seed emulsion polymerization. Hexa-boron nitride (h-BN) was modified on the surfaces by hydrothermal method, i.e., ABN. Then, the cyanate ester (CE) was melt-mixed with PBMAM and ABN to form CE/PBMAM/ABN composites. The effects of ABN content on the thermal conductivity and the mechanical properties of the toughened cyanate esters were discussed. The morphologies of the core-shell structure of the PBMAM toughener and the composites were characterized by transmission electron microscopy (TEM) and scanning electronic microscopy (SEM). The results show that the thermal conductivity of the CE/PBMAM/ABN composites is increased 2.4 times compared with that of pure CE resin, meanwhile the unnotched impact strength and the bending strength are increased 2.8 and 1.7 times, respectively, when the contents of the ABN and the PBMAM toughener are 8% and 5%, respectively. Meanwhile, the thermal decomposition temperature at 10% mass loss is increased by 50 ℃ compared with the pure CE matrix.

    参考文献
    相似文献
    引证文献
引用本文

翟 乐, 武向南, 张庆新, 瞿雄伟.增韧导热氰酸酯树脂基复合材料的制备及其性能[J].高分子材料科学与工程,2018,34(12):20-24. Le Zhai, Xiangnan Wu, Qingxin Zhang, Xiongwei Qu. Preparation and Properties of the Cyanate Ester Composites with High Thermal Conductivity and Toughness[J]. Polymer Materials Science & Engineering,2018,34(12):20-24.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司