反应挤出原位阴离子聚合尼龙6/石墨烯复合微球的连续制备与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51503088);中国博士后科学基金(2016M591796)


Continuous Preparation and Characterization of Polyamide 6/Graphene Microsphere via In Situ Anionic Polymerization by Reactive Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以己内酰胺(CL)、苯乙烯(St)及氧化石墨烯(GO)为主要原料,首先在熔融的CL中经自由基聚合得到聚苯乙烯(PS)/CL/GO 混合熔体,然后在双螺杆挤出机中引发CL阴离子聚合生成尼龙6(PA6),获得PS为连续相、GO 选择性分布于球状PA6分散相的PA6/PS/GO 三元混合物,最后去除PS相制备PA6/GO 复合微球。采用扫描电镜、透射电镜、热失重及差示扫描量热等方法,研究了GO 在三元混合物中的选择分布、PA6/GO 复合微球的结构及耐热性。结果表明,在三元混合物中GO 选择性分布于PA6相中;随着GO 含量增加,PA6/GO 复合微球的直径减小;与纯PA6微球相比,PA6/GO 复合微球具有更高的热稳定性。

    Abstract:

    In this study, ε-caprolactam, styrene and graphene were used as materials to prepare the polyamide 6/graphene microspheres. Firstly, free radical polymerization of styrene was first carried out in molten ε-caprolactam, and then an anionic polymerization of ε-caprolactam was preceded in the presence of the catalyst and activator in a twin screw extruder to form polyamide 6/polystyrene/graphene composites. At last, the above mixtures were washed with tetrahydrofuran as solvent to etch the PS phase, and polyamide 6/graphene microspheres was obtained. SEM, TEM, TGA and DSC were used to characterize the microspheres. The results show that graphene is selectively dispersed in the polyamide 6 phase of the polyamide 6/polystyrene/graphene composites, and the polyamide 6/graphene microspheres have a high thermal resistant.

    参考文献
    相似文献
    引证文献
引用本文

闫东广,王春亭,刘晓栋,宋玮琦,李照磊.反应挤出原位阴离子聚合尼龙6/石墨烯复合微球的连续制备与表征[J].高分子材料科学与工程,2018,34(12):101-105. Dongguang Yan, Chunting Wang, Xiaodong Liu, Weiqi Song, Zhaolei Li. Continuous Preparation and Characterization of Polyamide 6/Graphene Microsphere via In Situ Anionic Polymerization by Reactive Extrusion[J]. Polymer Materials Science & Engineering,2018,34(12):101-105.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司