Abstract:Hydrogels with high mechanical strength and anti-dehydration property were prepared by in situ free radical polymerization of acrylic acid (AA) and N, N-dimethyl acrylamide (DMAA) in the mixture solution of water and glycerol using alumina (Al2O3) nanoparticles as cross-linking agent. The results from SEM characterization and mechanical measurements reveal that the introduction of glycerol into the hydrogel system would not hinder the monomer polymerization and the formation of polymer network structures. The tensile strength of hydrogels increases from 181.3 kPa to 274.6 kPa as the glycerol mass fraction increases from 0% to 40%, while further increasing the glycerol mass fraction to 80% results in gradual decrease of the tensile strength to 113.6 kPa. Furthermore, the results from TGA, DSC and anti-dehydration of hydrogels indicate that the anti-dehydration property of hydrogels is enhanced with increasing of the glycerol content. Based on the excellent mechanical performance and anti-dehydration property, the hydrogels with the mass fraction 60% and 80% of glycerol exhibit excellent mechanical properties comparable to those at as-prepared state after placed in air for 10 d. Therefore, this new kind of hydrogel would have potential applications in fields of artificial skin, soft robot and so on.