Abstract:Polyaniline (PANI)/Ce(NO3)3 composites were successfully prepared by in situ polymerization in aqueous solution of poly (2-acrylamido-2-methylpropane sulfonic acid) and characterized by Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical methods. The results show that PANI/Ce(NO3)3 composites have high degree of sphericity, greater electrical conductivity and electrochemical performance. The conductivity of PANI/Ce(NO3)3 reaches the maximum conductivity of 46.76 S/cm at the Ce(NO3)3 content of 20%. It is increased by 377% by comparison with that of PANI. At the same time, the charge transfer resistance Rct is reduced to about 5 Ω. When the mass fraction of Ce(NO3)3 is 15%, the self-corrosion potential of the electrode material reaches -0.157 V, and the self-corrosion current density decreases from 15.85 μA/cm2 of polyaniline to less than 0.47 μA/cm2, which is reduced about 97%. Especially, polarization results show that the corrosion current density and the inhibition efficiency of PANI/Ce(NO3)3 are better than those of PANI. This suggest that PANI/Ce(NO3)3 composites have great promising applications in conductive materials, anticorrosion coating and other related fields.