含氟丙烯酸酯乳液的制备及对织物的整理与应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(31600478);中国博士后科学基金(2015M581723);江苏省自然科学基金青年基金(BK20140145);中央高校基本科研业务费专项资金(重点项目 JUSRP51718A);江苏高校优势学科建设工程资助项目(苏政办发[2014]37;聚合物分子工程国家重点实验室(复旦大学)开放研究课题(K2018-22)


Preparation of Fluorinated Acrylate Emulsion and Its Application to Fabric
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用三元乳液聚合方法,选用丙烯酸十三氟辛酯作为含氟单体,并以甲基丙烯酸甲酯和苯乙烯作为辅助单体在水中进行自由基共聚制得含氟共聚物(FP)乳液。在对其结构性能和微观形貌进行研究的基础上,将FP整理在不同纤维织物基材上。利用红外光谱、电子显微镜及接触角等手段研究了高聚物的表面形貌,考察了织物在整理前后的静态接触角、耐水洗性及透湿性等性能的变化。结果表明,FP膜具有纳米尺寸;整理的棉、涤纶、涤棉、锦纶和羊毛织物具有良好的超疏水性能;完成30次皂洗后,涤纶、锦纶和羊毛织物相比于棉和涤棉织物仍表现出较好的疏水效果。

    Abstract:

    The ternary element emulsion polymerization method was used in this paper. Tridecafluorooctyl acrylate (PFOA) was selected as fluoromonomer and free-radical copolymerization was carried out in water with methyl methacrylate (MMA) and styrene (St) as auxiliary monomers to prepare fluorocopolymer (FP) emulsion. Based on the study of its structural properties and microstructure, the FP was finished on different fiber fabric substrates. The surface morphology of polymer was studied by infrared spectroscopy, contact angle and etc. The changes of static contact angle, water washing resistance and moisture permeability were investigated before and after finishing. The results show that the FP film is a polymer film with nanoscale size. The finished cotton, polyester, polyester/cotton, nylon and wool fabrics all have super-hydrophobic effects. After washing 30 times, the finished polyester, nylon and wool fabrics still show good hydrophobic effect, but the hydrophobic effects of cotton and polyester/cotton fabrics are not ideal.

    参考文献
    相似文献
    引证文献
引用本文

郑君红,李可昕,黄婵娟,龙 柱,张 丹.含氟丙烯酸酯乳液的制备及对织物的整理与应用[J].高分子材料科学与工程,2019,35(2):29-35. Junhong Zheng, Kexin Li, Chanjuan Huang, Zhu Long, Dan Zhang. Preparation of Fluorinated Acrylate Emulsion and Its Application to Fabric[J]. Polymer Materials Science & Engineering,2019,35(2):29-35.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-03-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司