复合粉体制备导热吸波材料及其表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重大科技专项02专项(2014ZX02501009-005)


Preparation and Property of Thermal Absorbing Materials via Aluminum Oxide and Carbonyl Iron
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选择以氧化铝粉作为导热剂,羰基铁粉作为电磁波吸收剂,乙烯基硅油和含氢硅油为黏接剂制备导热吸波硅橡胶。通过网络分析仪、扫描电子显微镜、黏度计、热阻仪分析不同氧化铝粉和羰基铁粉的配比对硅橡胶的导热性能、吸波性能和加工性能的影响。结果表明,氧化铝粉用量为10%,羰基铁粉用量为80%时,硅橡胶具有良好的加工性能(硫化前黏度为6.5×104 Pa);导热率为2 W/(m·K),热阻抗为6.00 (℃·cm242)/W,反射率<-5 dB的频率范围为5~15 GHz,综合性能良好。

    Abstract:

    The thermal conductive and wave absorbing silicone rubber was prepared with aluminum oxide (thermal conductive agent), carbonyl iron (wave absorbing agent) , vinyl silicone oil and hydrogen silicone oil (binding agent). The thermal conductivity, wave absorbing performance and processability of silicone rubber with different alumina and carbonyl iron ratios were studied by network analyzer, scanning electron microscope, viscometer and thermal conductivity meter. A better formula is as following: the carbonyl iron 80% and aluminum oxide 10%. In this formula, the silicone rubber has good processability (viscosity is 6.5×104 Pa before vulcanization). The thermal conductivity is 2 W/(m·K), the thermal resistance is 6.00 ℃·cm2/W and the absorption higher than 5 dB has a wide frequency range from 5 GHz to 15 GHz.

    参考文献
    相似文献
    引证文献
引用本文

邹海仲,万炜涛,杨名华,陈田安,王红玉.复合粉体制备导热吸波材料及其表征[J].高分子材料科学与工程,2019,35(2):136-140. Haizhong Zou, Weitao Wan, Minghua Yang, Tian’an Chen, Hongyu Wang. Preparation and Property of Thermal Absorbing Materials via Aluminum Oxide and Carbonyl Iron[J]. Polymer Materials Science & Engineering,2019,35(2):136-140.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-03-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司