无皂交联水性有机硅改性聚酯涂层的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51703200);浙江省公益技术应用研究项目(2017C31030);浙江省大学生科技创新活动计划(2016R406054)


Preparation and Properties of Surfactant-Free Cross-Linked Waterborne Silicone-Modified Alkyd Resin Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用自乳化法制备得到储存稳定的水性有机硅改性聚酯乳液(WSAR),然后在室温下与交联剂(季戊四醇-三(3-氮丙啶基)丙酸酯,XR-100)混合交联成膜。当WSAR的酸值控制在50~60 mgKOH/g,XR-100添加量为15%时,通过热重分析和拉伸测试分析表明WSAR/15%XR-100交联复合膜的起始热分解温度(T5%)较WSAR膜提高了95 ℃,700 ℃残炭量增加了14.8%,且其拉伸强度和断裂伸长率分别达到4.49 MPa和146%;此外,电化学阻抗谱(EIS)研究结果表明,WSAR/15%XR-100涂层碳钢低频的阻抗模量达到104数量级。

    Abstract:

    A storage stable waterborne organic silicone modified alkyd resin emulsion (WSAR) were prepared through self-emulsifying method, and the trimethylolpropane-tris-(β-N-azridinyl) propionate (XR-100) was used as cross-linking agent, then the cross-linked WSAR/XR-100 composite films were further prepared at room temperature. When the acid value of alkyd resin is 50~60 mgKOH/g and the XR-100 content is 15%, the thermogravimetric analyzer, tensile tester results show that the initial decomposition temperature (T5%) of WSAR/15%XR-100 is improved by 95 ℃, and the yield of residual char at 700 ℃is increased by 14.8% compared with that of the WSAR film. Meanwhile, the tensile strength and fracture elongation of WSAR/15%XR-100 are 4.49 MPa and 146%, respectively. In addition, electrochemical impedance spectroscopy (EIS) test indicates that the impedance modulus of the cross-linked WSAR/15%XR-100 composite coating carbon steel reaches to a 104 order of magnitude at low frequency.

    参考文献
    相似文献
    引证文献
引用本文

钟申洁,李家炜,李岩阁,蔡 英,易玲敏.无皂交联水性有机硅改性聚酯涂层的制备及性能[J].高分子材料科学与工程,2019,35(2):141-146. Shenjie Zhong, Jiawei Li, Yange Li, Ying Cai, Lingmin Yi. Preparation and Properties of Surfactant-Free Cross-Linked Waterborne Silicone-Modified Alkyd Resin Coating[J]. Polymer Materials Science & Engineering,2019,35(2):141-146.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-03-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司