乳化法制备石蜡/三元乙丙橡胶定形相变材料及其性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金委员会-中国工程物理研究院联合基金资助项目(U1730114);四川省科技厅应用基础研究重点项目(2017JY0149);四川省教育厅科研创新团队项目(17TD0043); 环境友好能源材料国家重点实验室开放基金 (17kffk15)


Preparation of Paraffin/EPDM Shape Stabilized Phase Change Material and Its Properties by Emulsification
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以石蜡(Paraffin)为相变材料,三元乙丙橡胶(EPDM)为支撑材料,通过乳化法将石蜡和EPDM同时乳化,再热压硫化成型得到石蜡/EPDM定形相变材料。采用扫描电子显微镜表征了定形相变材料的断面微观形貌,结果表明石蜡与EPDM的相容性良好。通过差示扫描量热仪测试了定形相变材料的焓值,表明随着石蜡含量的增加,其焓值增加。通过渗漏测试表明PCMs-30%的渗漏率可低至0.5%。通过电子万能试验机测试表明PCMs-30%的力学性能达到较为良好的状态,拉伸强度达到0.866 MPa,断裂伸长率达到480%。

    Abstract:

    Paraffin/ ethylene propylene diene monomer (EPDM) shaped phase change materials were obtained by paraffin as phase change material and EPDM as supporting material. The paraffin and EPDM were simultaneously emulsified and then hot pressed subsequently vulcanized. Scanning electron microscopy (SEM) was used to characterize the cross-section morphology of the shaped phase change material. The results show that the compatibility between paraffin and EPDM is good. The enthalpy of the shaped phase change material was tested by differential scanning calorimetry (DSC), which indicates that the enthalpy value increases with the increase of paraffin content. The leakage test shows that the leak rate of PCMs-30% can be as low as 0.5%. Tests by electronic universal testing machine show that the mechanical properties of PCMs-30% reach a relatively good state, with the tensile strength of 0.866 MPa, and the elongation at break of 480%.

    参考文献
    相似文献
    引证文献
引用本文

丁 泽,程 弘,张 凯,杨文彬,范敬辉,吴菊英,何方方.乳化法制备石蜡/三元乙丙橡胶定形相变材料及其性能[J].高分子材料科学与工程,2019,35(2):171-174. Ze Ding, Hong Cheng, Kai Zhang, Wenbin Yang, Jinghui Fan, Juying Wu, Fangfang He. Preparation of Paraffin/EPDM Shape Stabilized Phase Change Material and Its Properties by Emulsification[J]. Polymer Materials Science & Engineering,2019,35(2):171-174.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-03-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司