温度对不同相对分子质量缓释型聚羧酸保坍剂性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划项目(2017YFB0310100)


Effect of Temperature on Performance of Slow-Released Polycarboxylate with Different Molecular Weight
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将丙烯酸羟丙酯引入保坍剂(PCE)中,合成了4种不同相对分子质量(Mw)的缓释型聚羧酸保坍剂,系统研究了温度对不同Mw保坍剂的分散和分散保持、水解速率及吸附进程的影响。随温度升高,PCE水解速率增大,吸附量增加,但初始流动度减小。低温(20 ℃)时,随着Mw减小,吸附速率(K)变小,吸附变慢,浆体溶液中残留的保坍剂分子多,可进一步发挥分散作用,低Mw样品的保坍能力优异。高温(30 ℃和40 ℃)时,随着Mw减小,K变大,吸附加快,浆体中残留的分子较少,且高温使水泥水化速度加快,分子更易被水化产物包埋,分散保持性能变差,合适Mw的样品初始分散性能优异,后期保坍能力也优异,温度对水化的影响超过对PCE水解速率增加的分散作用。

    Abstract:

    Four polycarboxylate copolymers (PCEs) with different molecular weight (Mw) were synthesized by introduction of hydroxypropyl acrylate (HPA) into water-based free radicals. The effects of temperature on the dispersion, dispersion retension, hydrolysis rate and adsorption process of slump agent with different Mw were studied systematically.With the increase of temperature, the hydrolysis rate and adsorption capacity of PCE increase, but the initial fluidity decreases. At low temperature (20 ℃), as Mw decreases, the adsorption rate K becomes smaller and the adsorption becomes slower. Therefore more residual molecules in slurry solution can play the role of dispersion. Thus low Mw samples have excellent slump retentions. At high temperature (30 ℃ and 40 ℃), with Mw decreasing, K and the rate of adsorption increase, resulting to less residual molecules in the slurry. High temperatures make the cement hydration faster, so molecules are more easily buried by hydration products resulting to a poor dispersion retention. Samples with the appropriate Mw show the excellent initial dispersibility and excellent post slump retention. The effect of temperature on hydration exceed the effect of increased dispersion of PCE hydrolysis.

    参考文献
    相似文献
    引证文献
引用本文

刘金芝,李申桐,张建纲,杨 勇,舒 鑫,冉千平.温度对不同相对分子质量缓释型聚羧酸保坍剂性能的影响[J].高分子材料科学与工程,2019,35(3):60-65. Jinzhi Liu, Shentong Li, Jiangang Zhang, Yong Yang, Xin Shu, Qianping Ran. Effect of Temperature on Performance of Slow-Released Polycarboxylate with Different Molecular Weight[J]. Polymer Materials Science & Engineering,2019,35(3):60-65.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-04-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司