Abstract:In this paper, polystyrene (PS) microspheres were used as template and mixed with different sizes of hexagonal boron nitride(h-BN) to construct the 3D boron nitride network structure in the epoxy resin. The 3D structure was prepared by hot compression, ablation, and then infiltrated with epoxy resin. The SEM observation shows that continuous thermal conductive networks of boron nitride were formed in the epoxy resin, and composites with different sizes of boron nitride possess a significant increase in the density of thermal networks, the thermal conductivity of composite is greatly improved. When the ratio of h-BN (15 μm) and h-BN (1 μm)is 9∶1 (the volume fraction is 50%), the highest thermal conductivity (1.98 W/(m·K)) could be exhibited, the thermal expansion coefficient reduces to 43.27 μm/(m·℃). Meanwhile, the thermal stability, dielectric performance and dynamic mechanical properties of the composite materials are also improved.