加成型液体氟硅橡胶等温固化的分析与模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

绿色轻工材料湖北省重点实验室开放基金(2013CLZD04)


Analysis and Simulation of Isothermal Curing for Additive Liquid Fluorosilicone Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过旋转流变仪对环状含氢氟硅油(DHF)和四甲基四乙烯基环四硅氧烷(DVi4)发生硅氢加成反应得到的加成型液体氟硅橡胶的固化过程流变学进行了研究。研究了不同等温固化温度对该体系固化反应过程的影响,并得到了体系固化反应的凝胶点为α=0.63。讨论了体系的固化反应模型,确定了Kamal自催化模型适用于体系的固化反应,得到了相关的模型参数及Kamal自催化模型方程。Kamal自催化模型方程对加成型液体氟硅橡胶的固化过程有重要的指导意义。

    Abstract:

    In this paper, the rheology of curing process for the additive liquid fluorosilicone rubber, which was synthesized by the hydrosilylation reaction of cyclic hydrofluorosiliconoil (DHF) and 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (DVi4) was studied. The effects of different isothermal curing temperatures on the curing process of the system were investigated, the gel point (α=0.63) of the curing reaction was obtained. The curing reaction model of the system was discussed, and the Kamal autocatalytic model applied to the curing reaction of the system was determined. The related model parameters and the Kamal autocatalytic model equation were acquired. The Kamal autocatalytic model equation is of great guiding significance for the curing process of the additive liquid fluorosilicone rubber.

    参考文献
    相似文献
    引证文献
引用本文

陈贤宏,李纯清,余 鹏,付志忠,陈绪煌.加成型液体氟硅橡胶等温固化的分析与模拟[J].高分子材料科学与工程,2019,35(3):108-113. Xianhong Chen, Chunqing Li, Peng Yu, Zhizhong Fu, Xuhuang Chen. Analysis and Simulation of Isothermal Curing for Additive Liquid Fluorosilicone Rubber[J]. Polymer Materials Science & Engineering,2019,35(3):108-113.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-04-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司