聚己烯-1弹性体的合成与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Characterization of Polyhexene-1 Elastomers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用Zielger-Natta催化体系对己烯-1进行均聚聚合试验,合成出聚己烯-1弹性体(PHe)。利用红外光谱、核磁共振对PHe进行了表征。考察了聚合时间、聚合温度、催化剂加入量、溶剂种类和加入量、助催化剂加入量、外给电子体的加入量对催化活性和聚合产品等规度的影响。结果表明,在催化剂为10 mg,己烯-1单体为62mL,己烷50 mL,n(Al)/n(Ti)=200,聚合温度为30 ℃,聚合时间2h,n(Al)/n(CHMMS)=20的条件下,成功合成出聚己烯-1弹性体。催化剂活性为1198 g PHe/gCat、聚合物的相对分子质量为218900,玻璃化转变温度为-41.39 ℃。

    Abstract:

    The polymerization of hexene-1 was synthesized by Zielger-Natta catalytic system and the polyhexene-1 elastomer (PHe) was synthesized. The PHe was chaacterized by FT-IR and 13C-NMR. Effects of the polymerization time, the polymerization temperature, the amount of catalyst, solvent type and addition amount, the amount of cocatalyst, the amount of external electron donor on the catalytic activity and the polymerization isotacticity were studied. The results show that when the mass of catalyst is 10 mg, the volume of monomer hexene-1 is 62 mL,the mass of hexane is 50 mL, n(Al)/n(Ti)=200, the polymerization temperature is 30 ℃, the polymerization time is 2 h, n(Al)/n(CHMMS) = 20, polyhexene-1 elastomers are successful synthesized. The catalytic activity is 1198 g PHe/g Cat, the polymer molecular weight is 218900, the glass transition temperature of -41.39 ℃.

    参考文献
    相似文献
    引证文献
引用本文

闫义彬,王玉如,韦德帅,任合刚,王登飞,徐用军.聚己烯-1弹性体的合成与表征[J].高分子材料科学与工程,2019,35(4):7-12. Yibin Yan, Yuru Wang, Deshuai Wei, Hegang Ren, Dengfei Wang, Yongjun Xu. Synthesis and Characterization of Polyhexene-1 Elastomers[J]. Polymer Materials Science & Engineering,2019,35(4):7-12.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-05-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司