聚α-甲基苯乙烯空心微球的开裂机理
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(U1530260,U51703212);国家自然科学基金青年基金资助项目(U51703212);NSAF联合基金(U1530260)


Formation Mechanisms of Crack on Surface of Poly-Alpha-Methylstyrene Shells
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    干燥过程是制备高表面质量聚α-甲基苯乙烯(PAMS)空心微球的关键过程之一。文中通过实验研究了不同热处理温度(55 ℃、75 ℃、95 ℃)和不同干燥温度(室温、45 ℃、65 ℃、85 ℃、100 ℃)对PAMS空心微球干燥过程的影响。实验结果表明,采用不同温度对PAMS空心微球进行热处理后,具有严重初始微缺陷的空心微球所占百分比没有显著差异。因为最高热处理温度(95 ℃)远远低于PAMS的玻璃化转变温度(≈180 ℃)而不能使PAMS分子链段运动以消除残余内应力。随着干燥温度的升高,干燥后的空心微球表面出现裂纹的比例相应增加。干燥温度的升高将会导致空心微球球壳所受应力不断增大。而球壳所受应力是其产生裂纹的主要原因之一。

    Abstract:

    Drying is one of the most important processes to prepare hollow poly-alpha-methylstyrene (PAMS) shells. Effects of the heating treatment temperature and the drying temperature on the PAMS drying process were investigated. Effect of the heating treatment temperature on the percentage of PAMS shells with initial defects can be neglected, because the highest heating treatment temperature (95 ℃) is far below the glass transition temperature of PAMS (180 ℃) so that the polymer chains cannot move for rearrangement to release a great deal of residual stress. With the increase of drying temperature, the percentage of PAMS shells with cracks onto the surface increases, because the stress inside PAMS shells increases correspondingly.

    参考文献
    相似文献
    引证文献
引用本文

潘大伟,杨 璨,李 洁,陈 强,李 波,黄卫星,刘梅芳.聚α-甲基苯乙烯空心微球的开裂机理[J].高分子材料科学与工程,2019,35(4):47-51. Dawei Pan, Can Yang, Jie Li, Qiang Chen, Bo Li, Weixing Huang, Meifang Liu. Formation Mechanisms of Crack on Surface of Poly-Alpha-Methylstyrene Shells[J]. Polymer Materials Science & Engineering,2019,35(4):47-51.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-05-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司