醚基硅溶胶和多异氰酸酯反应制备SiO2原位增强聚氨酯硬泡及其增强机理
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金面上项目(51673056); 安徽省科技重大专项(16030901053)


Preparation and Mechanism of In-Situ Reinforced Rigid SiO2/Polyurethane Foam Prepared from Polyether-Based Silica Sol and Polyisocyanate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    应用自制界面剂控制硅溶胶粒径,得到一种以聚醚多元醇为分散介质的聚醚基硅溶胶,以此硅溶胶与多异氰酸酯(PAPI)反应,制备了二氧化硅(SiO2)原位增强聚氨酯(PU)硬泡。通过发泡反应特性测试、电子显微镜观察泡孔结构及PU硬泡的压缩强度测试,研究了原位反应生成的SiO2对PU泡孔结构的影响,并结合数学模拟计算结果,探讨了SiO2对PU硬泡的增强机理。结果表明,界面剂对硅溶胶有较强稳定作用,原位反应生成的SiO2在PU发泡过程中具有良好的异相成核作用,且这种作用导致的泡孔均匀性与泡孔壁厚增加是SiO2增强PU硬泡的主要原因。当聚醚基硅溶胶浓度为8%时(以SiO2含量计),制备出的PU硬泡的泡孔较均匀,压缩强度较未增强的PU硬泡提升了约50%。

    Abstract:

    A polyether-based silica sol was prepared from self-made surfactant and silica sol. This polyether-based silica sol reacted with polyisocyanate(PAPI) to prepare in-situ reinforced rigid SiO2/PU foams. In order to study effects of SiO2 on the cell structure of polyurethane (PU) and the reinforce mechanism, the cell structure was observed by scanning electron microscope(SEM) and a mathematical model was used. The results show that the surfactant has a strong stabilizing effect on the silica sol, and the SiO2 made by in-situ reaction has a good heterogeneous nucleation during the PU foaming process. When the content of the polyether-based silica sol is 8%(calculated by the SiO2 content), the prepared PU foam presents a uniform cell size distribution, and the compressive strength is increased by about 50% compared with that of the non-silica sol.

    参考文献
    相似文献
    引证文献
引用本文

何小通,杨公雯,汪逸航,李嘉晋,倪国章,丁运生.醚基硅溶胶和多异氰酸酯反应制备SiO2原位增强聚氨酯硬泡及其增强机理[J].高分子材料科学与工程,2019,35(4):128-133. Xiaotong He, Gongwen Yang, Yihang Wang, Jiajin Li, Guozhang Ni, Yunsheng Ding. Preparation and Mechanism of In-Situ Reinforced Rigid SiO2/Polyurethane Foam Prepared from Polyether-Based Silica Sol and Polyisocyanate[J]. Polymer Materials Science & Engineering,2019,35(4):128-133.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-05-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司