基于三联苯与噻吩的D-A 二维共轭甲壳型聚合物的合成与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51463016);江西省重点研发计划(CK201601140);江西省教育厅科技项目(GJJ160689)


Synthesis and Characterization of 2D-Conjugated Poly(thiophene) Containing Terphenyl Side Chains Based on Mesogen-Jacketed Polymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过分子设计,采用Stille偶联反应成功合成了2种以含有给电子基(D)和吸电子基(A)的三联苯为侧链,聚噻吩为主链的二维共轭甲壳型高分子P1和P2,单体和聚合物的化学结构由核磁共振表征证实。通过热重分析曲线研究表明,甲壳型聚合物P1和P2具有良好的热稳定性,5%热失重温度高达330 ℃和280 ℃。2种聚合物的玻璃化转变温度都较低,分别为54℃和16.6℃。甲壳型聚合物P1和P2分子内的推、吸效应有助于提高紫外吸收,其紫外吸收范围为425~650nm。2种聚合物薄膜紫外的吸收边缘都在654nm,通过经验公式计算其光学带隙为1.90eV,是一种潜在的聚合物太阳能电池给体材料,也是一种以噻吩为主链的新型甲壳型聚合物。在聚合物太阳能电池给体材料中有潜在应用。

    Abstract:

    Two kinds of 2D-conjugated mesogen-jacketed polymers polythiophenes (P1 and P2) were successfully designed and synthesized by Stille coupling reaction, containing terphenyl mesogenic as side chain with electron donor groups and electron withdrawing groups. The chemical structures of the monomers and polymers were confirmed by 1H-NMR. All the polymers have good thermal stability, 5% mass loss temperature is up to 330 ℃ and 280 ℃ respectively. P1 and P2 get a relatively low glass transition temperature of 54 ℃ and 16.6 ℃ separately. Because of the polymers containing donor-acceptor (D-A) units, UV light absorptions are more strongly than those without such push-pull pairs, and the UV light absorption rang is 425~650 nm. The band gap of P1 and P2 is 1.90 eV by calculation. And it is found that the novel jacketed polymers with polythiophene as main chain have potential applications in polymer solar cell donor materials.

    参考文献
    相似文献
    引证文献
引用本文

万里鹰,韩荣梅,战宝柱,易 凡.基于三联苯与噻吩的D-A 二维共轭甲壳型聚合物的合成与表征[J].高分子材料科学与工程,2019,35(5):1-6. Liying Wan, Rongmei Han, Baozhu Zhan, Fan Yi. Synthesis and Characterization of 2D-Conjugated Poly(thiophene) Containing Terphenyl Side Chains Based on Mesogen-Jacketed Polymers[J]. Polymer Materials Science & Engineering,2019,35(5):1-6.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司