高填量疏水型Al2O3/TPU 防腐蚀可剥离膜的制备及耐腐蚀性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

咸阳市科技计划(2016K02-19);塑料卫生与安全质量评价技术北京市重点实验室(北京工商大学)开放基金(TQETJP2018004)


Preparation and Corrosion Resistance of a High Filling Hydrophilic Al2O3/Polyurethane Elastomer AntiCorrosive Strippable Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚氨酯弹性体(TPU)材料为基体,硬脂酸(SA)改性的氧化铝(Al2O3)为填料,采用平板流延法制备了SA-Al2O3/TPU 复合材料。通过红外光谱表征SA-Al2O3 的化学结构,X射线衍射分析SA-Al2O3 和复合材料的结晶性能;利用扫描电镜观察SA-Al2O3/TPU 复合材料的形貌;采用拉伸试验测试复合材料的力学性能;热重分析研究了复合材料的热稳定性能;利用盐水浸泡实验研究了复合材料的防腐性能。研究结果表明,Al2O3 经硬脂酸改性后,化学结构和晶型均未发生变化,接触角提高到160.8°;在满足一定的使用范围内,复合材料中SA-Al2O3 添加量最高可达40%(质量分数),拉伸强度和断裂伸长率分别为20.74MPa、446.55%,热稳定性能良好,且防腐性能较好。

    Abstract:

    The SA-Al2O3/TPU composites were prepared by the slab casting method using polyurethane elastomer (TPU) as matrix and stearic acid (SA) modified alumina as filler. The chemical structure of SA-Al2O3 was characterized by FT-IR, the crystallinity of the SA-Al2O3 and composites was analyzed by XRD. Meanwhile, the morphology, mechanical properties, thermal stability and corrosion resistance of SA-Al2O3/TPU composites were observed by SEM, tensile test, TG and brine immersion experiment, respectively. The results show that the chemical structure and the crystal form of Al2O3 modified with stearic acid do not change, the contact angle increases to 160.8°. Satisfying a certain range of usage, the content of added SA-Al2O3 in the composite materials reaches 40%, the tensile strength and the elongation at break are 20.74 MPa, 446.55% respectively, the thermal stability and the corrosion resistance are better.

    参考文献
    相似文献
    引证文献
引用本文

张 敏,韩俊文,翁云宣,李成涛.高填量疏水型Al2O3/TPU 防腐蚀可剥离膜的制备及耐腐蚀性能[J].高分子材料科学与工程,2019,35(5):143-149. Min Zhang, Junwen Han, Yunxuan Weng, Chengtao Li. Preparation and Corrosion Resistance of a High Filling Hydrophilic Al2O3/Polyurethane Elastomer AntiCorrosive Strippable Film[J]. Polymer Materials Science & Engineering,2019,35(5):143-149.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司