Zr(HPO4)2/浇铸尼龙6复合材料的制备及结晶性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11372108,11872179);湖南省自然科学基金资助项目(2018JJ4072);湖南省高校创新平台开放基金(18K079)


Preparation and Crystallization Properties of Zr(HPO4)2/MCPA6 Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用原位聚合法制备磷酸氢锆/浇铸尼龙6(Zr(HPO4)2/MCPA6)复合材料。X射线衍射和差示扫描量热研究表明,当Zr(HPO4)2 的质量分数为1.5%时,复合材料的结晶度由纯MCPA6的15.1%增加到22.2%,少量的Zr(HPO4)2对复合材料能起到结晶成核剂的作用,诱导γ(200)晶型的产生;偏光显微镜对复合材料等温结晶的观察进一步验证了上述对复合材料结晶度表征的结果。摆锤冲击试验和热重分析显示,随着Zr(HPO4)2 的加入,复合材料的冲击强度和热稳定性有所增加。

    Abstract:

    The Zr(HPO4)2/MCPA6 composites were prepared by in-situ polymerization. The results of XRD and differential scanning calorimeter show that when the mass fraction of Zr(HPO4)2 is 1.5%, the crystallinity of the composites increases from 15.1% of pure MCPA6 to 22.2%, a little amount of Zr(HPO4)2 can play the role of crystallization nucleating agent and induce the production of γ (200) crystal; the observation of isothermal crystallization of composites by polarizing microscope further verifies the above results of crystallinity characterization of the composites. The pendulum impact test and thermogravimetric analysis show that the impact strength and thermal stability of the composites increase with the addition of Zr(HPO4)2 into the matrix.

    参考文献
    相似文献
    引证文献
引用本文

李世杰,赖登旺,刘跃军,姜其斌,王文志,范淑红,郑 伟. Zr(HPO4)2/浇铸尼龙6复合材料的制备及结晶性能[J].高分子材料科学与工程,2019,35(5):150-156. Shijie Li, Dengwang Lai, Yuejun Liu, Qibin Jiang, Wenzhi Wang, Shuhong Fan, Wei Zheng. Preparation and Crystallization Properties of Zr(HPO4)2/MCPA6 Composites[J]. Polymer Materials Science & Engineering,2019,35(5):150-156.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司