长玻纤增强塑料注射成型纤维断裂概述
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(11372285,10972201);国家重点实验室开放课题(GZ1706,GZ1203)


Overview of the Fracture of Long Glass Fiber Reinforced Thermoplastics During Injection Molding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    长玻纤增强塑料(LGFT)能有效改善塑料强度,拓展了塑料的应用范围;但注塑成型中常有纤维断裂的问题而影响玻纤增强效果。文中根据长玻纤增强塑料注射成型的研究成果,从材料、工艺、设备、数学模型和数值模拟方面介绍了注射成型对LGFT制品内玻纤长度的影响,总结了工艺参数及设备结构对纤维断裂的影响,以及纤维断裂模型的进展和数值模拟在纤维长度预测的应用,归纳了LGFT成型加工的适用范围和研究趋势。

    Abstract:

    Long glass fiber reinforced thermoplastics (LGFT) are now commercially available materials, which can demonstrate appreciable mechanical property premiums in more and more engineering applications. However, it is generally accepted that any fiber reinforced thermoplastic should be molded with a degree of care in order to preserve fiber aspect ratio in the final molded article and to minimize fiber length breakdown during processing. With the advent of the so called long fiber injection molding grades, it is even more important to have some further understanding of the glass fiber breaking mechanisms, if the long fiber benefits are to be realized in finished products. Based on the achievements of LGFT injection molding, the effects of fiber length, processing parameters and injection machine on the mechanical properties were reviewed. Meanwhile, the process parameters and equipment structures on fiber breakage were considered, especially stress on the development of fiber fracture mathematical models, numerical simulation and its application to predict the fiber length. Finally, the LGFT processing limits and the forecast trend of LGFT were briefly expounded, and their emphases of future research was described.

    参考文献
    相似文献
    引证文献
引用本文

侯旭秦,李桂丽,陈兴元,李鹏辉,李海梅.长玻纤增强塑料注射成型纤维断裂概述[J].高分子材料科学与工程,2019,35(5):179-183. Xuqin Hou, Guili Li, Xingyuan Chen, Penghui Li, Haimei Li. Overview of the Fracture of Long Glass Fiber Reinforced Thermoplastics During Injection Molding[J]. Polymer Materials Science & Engineering,2019,35(5):179-183.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司