羧基单体对脂肪族聚酯性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31570097)


Effect of Carboxyl Monomer on Properties of Aliphatic Polyester
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以1,4-丁二醇和3种不同的羧基单体为反应物,通过溶液聚合法合成3种脂肪族聚酯——聚(丁二酸丁二酯)(PBS)、聚(己二酸丁二酯)(PBA)和聚(辛二酸丁二酯)(PBSub)。利用红外光谱、核磁共振、差示扫描量热、热重分析、拉伸测试等分析手段对3种聚酯的结构、热性能和力学性能进行分析,并对所合成聚酯的酶促降解性能进行了研究。结果表明,3种脂肪族聚酯综合性能较优,热分解温度均高于328 ℃,热稳定性良好;力学性能测试发现三者断裂伸长率均在300%以上;酶解实验表明,24 h时3种聚酯的失重率超过90%,可降解性良好。随着羧基单体中亚甲基数目的增加,脂肪族聚酯的拉伸强度降低,但聚酯断裂伸长率和酶降解性能提高。

    Abstract:

    Three different aliphatic polyesters, poly (butylene succinate) (PBS), poly(butylene adipate) (PBA) and poly(butylene suberate) (PBSub), were synthesized by solution polycondensation using 1,4-butanediol as hydroxyl monomers, succinic acid, adipic acid, and suberic acid as carboxyl monomers, respectively. FT-IR, NMR, DSC, TG, testing machine were used to characterize the structure, thermal stability, mechanical properties and biodegradability of three different kinds of aliphatic polyesters. All the three different kinds of polyesters exhibit good performances. The thermal decomposition temperature of the polyesters is higher than 328 ℃, and the thermal stabilities are well. The elongation at break of the aliphatic polyesters is above 300%. The biodegradation rate of the three polyesters is more than 90% after 24 h, and the biodegradability is excellent. The results show that with the increase of methylene groups in the carboxyl monomers, the tensile strength decreases, but the elongation at break and biodegradability increase.

    参考文献
    相似文献
    引证文献
引用本文

白桢慧, 苏婷婷, 王战勇.羧基单体对脂肪族聚酯性能的影响[J].高分子材料科学与工程,2019,35(6):10-15. Zhenhui Bai, Tingting Su, Zhanyong Wang. Effect of Carboxyl Monomer on Properties of Aliphatic Polyester[J]. Polymer Materials Science & Engineering,2019,35(6):10-15.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司