转移涂布用水性丙烯酸系压敏黏合剂的交联与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项资金;中日友好医院生物医学转化工程系列研究项目(PYBZ1840)


Crosslinking and Properties of Waterborne Acrylic Pressure Sensitive Adhesive Articles Prepared by Transfer Coating Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以丙烯酸正丁酯、丙烯酸-2-乙基己酯为单体,壬基酚聚氧乙烯醚硫酸铵为乳化剂,巯基乙醇为链转移剂,(N-丁氧基甲基)丙烯酰胺/丙烯酸(NBMA/AA)为交联体系,采用全乳化半连续乳液聚合法制备了适用于转移涂布用丙烯酸系压敏黏合剂,所得黏合剂相对交联速度慢,制品剥离时几乎无残胶。系统研究了NBMA/AA交联体系用量对乳液及压敏黏合剂制品性能的影响,当NBMA用量为1.5%,AA用量为3.0%时,乳液聚合稳定性最好,压敏黏合剂的初黏力可维持在14#球以上,持黏力超过48 h,180°剥离强度为2.72 N/25 mm。

    Abstract:

    Waterborne acrylic pressure sensitive adhesive (PSA) was prepared by semi-continuous emulsion polymerization using n-butyl acrylate, 2-ethylhexyl acrylate as main monomer, nonylphenol polyoxyethylene ether sulfate as emulsifier, mercaptoethanol as chain transfer agent and N-butoxy methyl acrylamide/acrylic acid (NBMA/AA) as crosslinking system. The above PSA with a slower crosslinking speed, which is suit to prepare the waterborne acrylic PSA articles by the transfer coating method, will not leave adhesice residues on the adherend surface when its article is peeled from adherend. Effects of the NBMA and AA dosage on the emulsion and PSA performances were studied in detail. Results show that the copolyacrylate emulsion with a high stability can be gotten when the NBMA and AA dosage is 1.5% and 3.0% respectively. The tack of waterborne acrylic pressure sensitive adhesive by the transfer coating method reaches 14# ball, and the holding power exceedes 48 h, 180° peel strength is 2.72 N/25 mm.

    参考文献
    相似文献
    引证文献
引用本文

夏宇正, 钱宣羽, 陈晓农, 石淑先.转移涂布用水性丙烯酸系压敏黏合剂的交联与性能[J].高分子材料科学与工程,2019,35(6):29-34. Yuzheng Xia, Xuanyu Qian, Xiaonong Chen, Shuxian Shi. Crosslinking and Properties of Waterborne Acrylic Pressure Sensitive Adhesive Articles Prepared by Transfer Coating Method[J]. Polymer Materials Science & Engineering,2019,35(6):29-34.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司