干燥温度对生物塑料聚羟基丁酸-羟基己酸酯薄膜结构及性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31270607)


Effect of Drying Temperature on the Structure and Properties of Bioplastic Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以N,N-二甲基甲酰胺(DMF)为溶剂,采用溶液浇铸法制备聚羟基丁酸-羟基己酸酯(PHBH)生物降解薄膜,并利用相应的测试方法,探究了不同干燥温度对PHBH薄膜的形貌结构、结晶、热稳定性、透明度、力学和阻隔性能的影响。结果表明,随着干燥温度的升高,PHBH薄膜的断面致密性、结晶度、热稳定性、断裂伸长率及阻隔性能先增大后减小,晶粒尺寸逐渐减小,而透明度及拉伸强度逐渐增加;当干燥温度为55 ℃时,PHBH薄膜断面光滑、结晶度大,具有良好的热稳定性、力学强度及阻隔性,其拉伸强度为20.26 MPa,断裂伸长率为25%,氧气及水蒸气透过率分别为5.7×10-15cm3·cm/(cm2·s·Pa)、2.21×10-14 g·cm/(cm2·s·Pa)。

    Abstract:

    This work was aimed to explore the effect of different drying temperatures on the morphology, crystallization, thermal stability, transparency, mechanical and barrier properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) films, which was prepared by solution casting method with N,N-dimethylformamide (DMF) as solvent, by corresponding test methods. The results show that as the temperature rises, the densification, crystallinity, thermal stability, elongation at break and barrier properties of PHBH films increase firstly and then decrease, with the decrease of grain size and gradually, and the increase of transparency and tensile strength. When the drying temperature is 55 ℃, the PHBH film has a smooth cross section, good crystallinity, thermal stability, mechanical strength and barrier property. The tensile strength and the elongation at break are 20.26 MPa and 25% respectively, and the oxygen and water vapor transmittance are 5.7×10-15cm3·cm/(cm2·s·Pa) and 2.21×10-14 g·cm/(cm2·s·Pa), respectively.

    参考文献
    相似文献
    引证文献
引用本文

邱玉娟, 马晓军, 王丹丹.干燥温度对生物塑料聚羟基丁酸-羟基己酸酯薄膜结构及性能的影响[J].高分子材料科学与工程,2019,35(6):54-58. Yujuan Qiu, Xiaojun Ma, Dandan Wang. Effect of Drying Temperature on the Structure and Properties of Bioplastic Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Film[J]. Polymer Materials Science & Engineering,2019,35(6):54-58.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司