工艺条件对聚丙烯/乙烯-醋酸乙烯酯共聚物原位微纤复合材料的微纤形态及流变性能影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21664004);贵州省科技计划(黔科合基础[2017]1090号);黔科合支撑[2019]2849 号;黔科合平台人才[2019]5639 号


Effect of Process Conditions on Microfiber Morphology and Rheological Properties of Isotactic Polypropylene/Vinyl-Vinyl Acetate Copolymer In-Situ Microfiber Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过微纳层叠共挤技术实现聚丙烯(iPP)在乙烯-醋酸乙烯酯共聚物(EVA)中的原位成纤,研究不同牵引速率、螺杆转速对iPP/EVA(15/85)原位微纤复合材料(MFCs)中微纤形态及流变性能影响。扫描电子显微镜结果显示, 在不同的牵引速率下,iPP均在EVA中形成微纤,随着牵引速率的增大,iPP微纤的直径先下降后增大。在不同螺杆转速下,iPP均形成长径比较大的微纤,随着螺杆转速的增加,形成的iPP微纤平均直径先增大后减小,微纤直径分布范围逐渐变窄。流变分析测试表明,当牵引速率为50 r/min时,MFCs的G′、G″和η*均最大;当螺杆转速为250 r/min时,MFCs的G′、G″和η*均最低。

    Abstract:

    The in-situ isotactic polypropylene (iPP) microfiber was prepared by micro-nano-stack co-extrusion technique in vinyl-vinyl acetate copolymer(EVA), and the effect of different stretching rates and screw speeds on the morphology and rheological properties of microfibers in the iPP/EVA(15/85) in-situ microfiber composites(MFCs) was studied. The scanning electron micrographs show that iPP forms microfibers in the EVA matrix under different tensile speeds, the diameter of iPP microfibers decreases first and then increases with the stretching rate increasing. iPP forms microfibers with relatively large lengths at the four different screw speeds, the average diameter of the iPP microfibers increases first and then decreases with the increase of screw speed, and the distribution range of microfiber diameters gradually narrowed. The G′, G′ and η* of the MFCs are the largest when the stretching rate is 50 r/min, and the G′, G′ and η* of the MFCs are the lowest when the screw speed is 250 r/min.

    参考文献
    相似文献
    引证文献
引用本文

孙 静, 韦良强, 黄安荣, 罗珊珊, 张婷婷, 石 敏.工艺条件对聚丙烯/乙烯-醋酸乙烯酯共聚物原位微纤复合材料的微纤形态及流变性能影响[J].高分子材料科学与工程,2019,35(6):79-86. Jing Sun, Liangqiang Wei, Anrong Huang, Shanshan Luo, Tingting Zhang, Min Shi. Effect of Process Conditions on Microfiber Morphology and Rheological Properties of Isotactic Polypropylene/Vinyl-Vinyl Acetate Copolymer In-Situ Microfiber Composites[J]. Polymer Materials Science & Engineering,2019,35(6):79-86.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司