聚吡咯/聚烯烃弹性体纳米纤维压力传感器的制备及性能应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51473129);中央高校基本科研业务费专项资金(CUSF-DH-D-2018059)


Preparation, Performance and Applications of Polypyrrole/Polyolefin Elastic Nanofiber Pressure Sensors
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以原位聚合法制备导电聚吡咯/聚烯烃弹性体(PPy/POE)纳米纤维浆料,并利用模版复制法获得表面具有微阵列结构的导电纳米纤维膜。研究了导电纳米纤维膜表面结构对传感器灵敏度的影响,探究了投入Py单体与POE弹性纳米纤维质量比和导电纳米纤维膜的厚度对传感器性能的影响。结果表明,对导电纳米纤维膜作表面结构化处理可大幅提高传感器的灵敏度。当Py单体与纳米纤维质量比为1∶1,导电纳米纤维膜厚度为48 μm时,纳米纤维基压力传感器灵敏度可达39.7 kPa-1,施加应力和撤除应力时的响应时间分别为10 ms和12 ms。通过探究传感器组件结构与性能之间的关系,得到了最优传感器组件结构参数与压力传感器性能。

    Abstract:

    Elastic conductive polypyrrole/polyolefin (PPy/POE) elastomer nanofiber ink prepared via in situ polymerization was applied to obtain surface structured nanofibrous membranes by template replication method. The influences of the conductive nanofiber membrane surface structure on the sensitivity of sensors was discussed. The effects of the mass ratio of PPy and POE as well as the thickness of the conductive nanofibers on the performance of sensors were investigated. The results indicate that the sensitivity of the sensors can be greatly improved by constructing surface structure. The sensitivity of sensor achieves 39.7 kPa-1 when the mass ratio of PPy and POE is 1∶1 and the thickness of conductive nanofiber film is 48 μm. Additionally, the response time of applying stress and removing stress is 13 ms and 10 ms, respectively. By exploring the relationship between sensor component structure and its performance, the optimal sensor component structure parameters and pressure sensor performance are obtained, and the direction is pointed out for the preparation of flexible pressure sensors with excellent performance.

    参考文献
    相似文献
    引证文献
引用本文

刘 翠, 钟卫兵, 王 栋.聚吡咯/聚烯烃弹性体纳米纤维压力传感器的制备及性能应用[J].高分子材料科学与工程,2019,35(6):94-99. Cui Liu, Weibing Zhong, Dong Wang. Preparation, Performance and Applications of Polypyrrole/Polyolefin Elastic Nanofiber Pressure Sensors[J]. Polymer Materials Science & Engineering,2019,35(6):94-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-07-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司