Abstract:Poly(ethylene-tetrafluoroethylene) (ETFE) hollow fiber membranes were prepared for the first time by melt-spinning-cold stretching method, with ETFE as membrane forming polymer,dibutyl phthalate (DBP) as plasticizer and composite pore forming agent which was composed of water solubility and water insolubility pore forming agent were used in this study. Afterwards, the effects of different draw ratios on the membrane structure and properties were studied through the characterization of porosity, rejection ratio, permeability, mechanical properties and acid and alkali resistance of ETFE hollow fiber membranes. The results show that the cross-section morphologies of the ETFE hollow fiber membranes have a honeycomb-like pore structure. As the draw ratio increases, the surface of the membrane gradually exhibits obvious interfaces microporous, the permeation flux, porosity and break strength increase significantly. Meanwhile, the elongation at break and the rejection ratio of direct black 19(DB 19)decrease. Moreover, after the primary ETFE hollow fiber membrane is immersed in 30% NaOH and H2SO4 solution for 10 d, the breaking strength retention ratio is higher than 84%, which shows excellent performance of acid and alkali resistance.