结晶特性对聚丙烯空间电荷及直流击穿强度影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51337002);黑龙江省普通本科高等学校青年创新人才培养计划(UNPYSCT-2016162)


Effect of Crystalline Characteristics on Space Charge and DC Breakdown Strength of Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用扫描电子显微镜、偏光显微镜和差示扫描量热法观察了不同成形条件聚丙烯(PP)的结晶形态及结晶度,通过动态力学热分析(DMA)测试了不同结晶形态PP的力学特性,利用电声脉冲法(PEA)测得不同结晶形态PP的空间电荷特性,并对不同结晶形态PP进行了直流击穿强度测试。结果表明,PP在较高的熔融温度和结晶温度下减少了晶核数目并促进了球晶生长。DMA和PEA测试表明,小球晶可使PP的储存模量降低,大球晶在生长过程中,将较多的杂质和低分子物排挤到无定形区中,导致β松弛损耗增大,从而使室温下的空间电荷量明显增加。直流击穿强度测试表明,当PP形成大且疏的球晶时,击穿过程可沿更短的路径发展,并且无定形区存在较多杂质及低分子物,从而使击穿强度明显降低。

    Abstract:

    The crystalline morphology and crystallinity of PP under different forming conditions were observed by SEM, polarized light microscopy (PLM) and differential scanning calorimetry (DSC). The mechanical properties of different crystalline forms of PP were tested by dynamic mechanical analysis (DMA). The space charge characteristics of different crystal forms of PP were measured by electroacoustic pulse method (PEA), and DC breakdown strength tests were performed on different crystalline forms of PP. The results show that the crystalline morphology and crystallinity of PP are significantly different at different melting temperatures and crystallization temperatures. The higher melting temperature and crystallization temperature decrease the number of nuclei and promote the growth of spherulites. The results of DMA and PEA tests show that the small spherulites can reduce the storage modulus of PP. During the growth process of large spherulites, more structural defects are pushed out into the amorphous region, resulting in the increased β-relaxation loss and thus the space charge at room temperature increases significantly. The DC breakdown strength test results show that when PP forms large and sparse spherulites, the breakdown process can develop along a shorter path, and there are more impurity in the amorphous areas, so that the breakdown strength is significantly reduced.

    参考文献
    相似文献
    引证文献
引用本文

赵 洪,吕洪雷,杨佳明,高铭泽,王理想,何 辉.结晶特性对聚丙烯空间电荷及直流击穿强度影响[J].高分子材料科学与工程,2019,35(7):88-93. Hong Zhao, Honglei Lü, Jiaming Yang, Mingze Gao, Lixiang Wang, Hui He. Effect of Crystalline Characteristics on Space Charge and DC Breakdown Strength of Polypropylene[J]. Polymer Materials Science & Engineering,2019,35(7):88-93.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-08-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司