固相剪切碾磨制备聚甲醛/聚氧化乙烯/二硫化钼复合材料的形貌与力学性能和摩擦磨损性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51773121);国家重点研发计划(2017YFE0111500);四川省青年科技创新团队(2016TD0010)


Morphology, Mechanical Performance and Tribological Property of Polyoxymethylene/Polyethylene Oxide/MoS2 Composites Prepared Through Solid-State Shear Milling Technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用固相剪切碾磨(S3M)技术制备了聚甲醛/聚氧化乙烯/二硫化钼(POM/PEO/MoS2)复合粉体和材料,且进一步采用扫描电子显微镜、万能材料试验机、热失重分析仪、摩擦磨损测试仪测试和研究其形貌、粒径分布、力学性能、热稳定性和摩擦磨损性能。实验结果表明,在磨盘碾磨强大的三维剪切力场作用下,增韧改性剂PEO 和MoS2 填料粒子在POM 基体树脂中分散均匀,所得复合粉体粒子尺寸达到微米级。PEO 改性剂的引入和磨盘碾磨的共同作用可有效提高POM 的冲击性能,同时PEO 通过对MoS2 粒子的包覆有效解决了POM 热稳定性低和难以加工的问题。此外,磨盘碾磨作用下,PEO 与MoS2 的结合还明显降低了POM 的摩擦系数和损耗量,赋予所得POM/PEO/MoS2 三元复合材料优异的自润滑和摩擦磨损性能。

    Abstract:

    Solid-state shear milling (S3M) technology was used to prepare polyoxymethylene/polyethylene oxide/molybdenum disulfide (POM/PEO/MoS2) co-powders and composites. Then, scanning electronic microscope (SEM), universal material testing machine, thermogravimetric analyzer (TGA) and friction wear tester were further used to investigate the corresponding morphology, particle size distribution, mechanical performance, thermal stability and friction and wear properties. The experimental results show that, under effect of the strong three dimensional shear force field during pan-milling, the PEO modifier and MoS2 filler particles are uniformly dispersed in the POM matrix and the size of the co-powder decreases to the micrometer level. The co-effect of the introduced PEO modifier and pan-milling could effectively improve the impact property of POM. In the meantime, the encapsulation of MoS2 particles with PEO also effectively solves the problems of the low thermal stability and degradation of POM during processing. In addition, the combination of PEO and MoS2 could significantly reduce the friction coefficient and wear volume of POM, endowing the obtained POM/PEO/MoS2 ternary composite with excellent self-lubrication and friction performance.

    参考文献
    相似文献
    引证文献
引用本文

何雪薇,陈英红,姜向升,王 萌.固相剪切碾磨制备聚甲醛/聚氧化乙烯/二硫化钼复合材料的形貌与力学性能和摩擦磨损性能[J].高分子材料科学与工程,2019,35(7):94-99. Xuewei He, Yinghong Chen, Xiangsheng Jiang, Meng Wang. Morphology, Mechanical Performance and Tribological Property of Polyoxymethylene/Polyethylene Oxide/MoS2 Composites Prepared Through Solid-State Shear Milling Technology[J]. Polymer Materials Science & Engineering,2019,35(7):94-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-08-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司