透皮给药实心微针阵列的紫外压印工艺方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中提出了一种紫外压印技术成型透皮给药实心微针的工艺方法,以C-coating光刻胶作为微针成型的原材料,采用微机电技术加工的聚二甲基硅氧烷(PDMS)微针模具,探究了紫外压印实验中影响微针成型质量的工艺条件。实验结果表明,利用C-coating光刻胶抽真空12min以上,紫外曝光170~200s时,制备的紫外压印微针的高度能达到230μm。通过纳米压痕力学测试和猪皮离体皮肤穿刺实验,证明这种紫外压印微针的针尖在承受50mN 的力时没有发生断裂破坏现象,并且能够顺利刺入猪皮达到良好的透皮给药效果,为紫外压印技术成型透皮给药微针提供了一定的技术参考。

    Abstract:

    This paper mainly proposed a method of fabricating transdermal drug delivery microneedle arrays by ultraviolet printing technology. The C-coating photoresist was used as raw material for fabricating the microneedles, and the microneedle mold of polydimethylsiloxane (PDMS) was processed by microelectromechanical technology. In the UV imprinting experiment, the technological conditions that affects the quality of the microneedles were explored. When the C-coating photoresist was pumped for more than 12 min and the time of UV exposure was between 170 s to 200 s, the experimental results show that the height of the UV imprint microneedles can reach 230 μm. The nano-indentation mechanics test shows that the tips of the UV imprinted microneedles have no rupture and destruction when it bears the force of 50 mN, and the pigskin puncture experiment shows that the UV imprinted microneedles can penetrate the pigskin smoothly and perform a good transdermal delivery effect. This study provided a supporting technology for the fabrication of transdermal drug delivery microneedles by UV imprint technology.

    参考文献
    相似文献
    引证文献
引用本文

庄 俭,饶 峰,孙靖尧,许 红,刘 颖,高小龙,黄 尧,吴大鸣.透皮给药实心微针阵列的紫外压印工艺方法[J].高分子材料科学与工程,2019,35(7):108-113. Jian Zhuang, Feng Rao, Jingrao Sun, Hong Xu, Yin Liu, Xiaolong Gao, Yao Huang, Daming Wu. Ultraviolet Imprinting Technology of Fabricating Transdermal Drug Delivery Microneedle Arrays[J]. Polymer Materials Science & Engineering,2019,35(7):108-113.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-08-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司