ARGETATRP调控的硅表面嵌段聚合物刷的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省高等学校科技计划项目(J16LA01);国家自然科学基金资助项目(51503094);聊城大学大学生科技文化创新基(26312161932, 26312161927, 26312161931, 26312171917, 26312171930);聊城大学大学生创新训练计划(CXCY2017154)


Preparation and Properties of Block Copolymer Brushes Grafted From Silicon Substrate via ARGET ATRP
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首先将γ-甲基丙烯酸酯基三甲氧基硅烷(KH570)引入到硅片表面,通过表面引发的电子转移活化再生催化剂原子转移自由基聚合(SI-ARGETATRP)方法在硅片表面进行接枝聚合,制备出2种不同嵌段聚合物刷———硅片-g-聚苯乙烯-b-聚甲基丙烯酸甲酯(Si-g-PS-b-PMMA)和硅片-g-聚苯乙烯-b-聚N-异丙基丙烯酰胺(Si-g-PS-b-PNIPAM)。通过X射线光电子能谱、核磁共振氢谱和液相凝胶渗透色谱对聚合物和硅片表面的结构进行了测试和分析,结果表明溶液中形成的聚合物相对分子质量分布较窄(在1.1~1.2之间),且分子链末端含有Br,说明聚合过程是按照ARGETATRP机理进行。三维接触式表面轮廓仪测试结果表明,在接枝嵌段聚合物之后硅表面的表面粗糙度Sa=0.603μm。硅片表面接触角也发生了变化,在接枝聚苯乙烯后表面的接触角变为95.51°,通过接枝甲基丙烯酸甲酯接触角变为80.70°。这些变化进一步证实了硅片表面成功接枝了嵌段聚合物刷。

    Abstract:

    Firstly, γ-methacrylate trimethoxysilane (KH570) was introduced onto the silicon surface. Two different block copolymer brushes—— silicon-graft-poly(styrene)-block-poly(methyl methacrylate) (Si-g-PS-b-PMMA) and silicon-graft-poly(styrene)-block-poly(N-isopropyl acrylamide) (Si-g-PS-b-PNIPAM) were prepared via surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP) on silicon substrates. The structure of polymers formed in the solution and the silicon substrate was demonstrated by proton nuclear magnetic resonance spectroscopy spectra (1H-NMR), gel permeation chromatograph (GPC) and X-ray photoelectron spectroscopy (XPS), respectively. The results show that the molecular weight distribution is narrow (1.1~1.2), and the end of molecular chain contains bromine, which indicates that the polymerization process follows the ARGET ATRP mechanism. The results of the 3D-surface profilometer (3D-SPM) illustrate that the surface roughness of the silicon surface Sa=0.603 μm after grafting the block polymer. The contact angles meter (CA) of the surface changes to 95.51° after grafting polystyrene, and down to 80.70° by the grafting of methyl methacrylate. These changes further confirm the successful grafting of the block polymer brush on the surface of the wafer.

    参考文献
    相似文献
    引证文献
引用本文

闫春娜,徐 琳,王利平,柏丽萍,李 光. ARGETATRP调控的硅表面嵌段聚合物刷的制备及性能[J].高分子材料科学与工程,2019,35(7):126-131. Chuanna Yan, Lin Xu, Liping Wang, Liping Bai, Guang Li. Preparation and Properties of Block Copolymer Brushes Grafted From Silicon Substrate via ARGET ATRP[J]. Polymer Materials Science & Engineering,2019,35(7):126-131.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-08-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司