多孔Nafion膜离子聚合物金属复合材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省高等学校科技计划项目(J17KB013,J16LB51);黑龙江省普通本科高等学校青年创新人才培养计划(UNPYSCT-2018205,UNPYSCT-2016035);黑龙江省普通高校基本科研业务费专项资金(LGYC2018JC052);国家自然科学基金资助项目(51473074)


Preparation and Characteristic of Porous Nafion Membrane Ionic Polymer Metal Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    离子聚合物金属复合材料(IPMC)是一种新型人工肌肉材料。传统IPMC的含水率较低,其电致动性能较差。文中采用微粒浸析法,利用纳米四氧化三铁粒子成功制备了多孔Nafion膜。多孔Nafion膜含水率是普通Nafion膜的2.5~4.3倍,并且随着纳米粒子含量的增加,含水率不断增大。多孔Nafion膜IPMC的输出位移、应变能密度(能量转换效率)和稳定工作时间分别是普通Nafion膜IPMC的1.6~2.5倍、2.8~4.8倍和1.7~2.1倍。总之,Nafion膜中多孔结构的存在提高了IPMC的电致动性能。

    Abstract:

    Ionic polymer metal composites(IPMC)is a kind of new artificial muscle material. Owing to the low water content, the common Nafion membrane IPMC has a poor actuating performance. Nano-oxide of iron was used to prepare the porous Nafion membranes utilizing the particulate leaching method in this paper. Moisture content test indicates that the water content of porous Nafion membrane is 2.5 to 4.3 times that of the common Nafion membrane. And with the increase of nanoparticles content, the water content of Nafion membrane also increases. The output displacement, the strain energy density (on the ground of energy transformation) and the non-water working time of porous Nafion membrane IPMC are 1.6~2.5 times, 2.8~4.8 times and 1.7~2.1 times respectively as much as that of the common Nafion membrane IPMC. In a word, the presence of porous structure can enhance the actuation performance of IPMC.

    参考文献
    相似文献
    引证文献
引用本文

杜 野,梁 博,张 鹏,赵 刚,赵金涛,王伟华,刘甲奇,马昊哲,王运鑫,王冠正,李政勋.多孔Nafion膜离子聚合物金属复合材料的制备及性能[J].高分子材料科学与工程,2019,35(7):132-140. Ye Du, Bo Liang, Peng Zhang, Gang Zhao, Jintao Zhao, Weihua Wang, Jiaqi Liu, Haozhe Ma, Yunxin Wang, Guanzheng Wang, Zhengxun Li. Preparation and Characteristic of Porous Nafion Membrane Ionic Polymer Metal Composites[J]. Polymer Materials Science & Engineering,2019,35(7):132-140.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-08-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司