[ONSO]AlCl配合物催化4-乙烯基环氧环己烷聚合制备聚醚及其功能化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51473045)


Preparation and Functionalization of Polyether Prepared by 1,2-Epoxy-4-Vinycyclohexane Catalyzed by [ONSO] Al Complex
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过溶剂挥发法得到[ONSO]型配体L的晶体,对其单晶结构进行了解析;制备该配体的金属Al配合物1,以1为催化剂,研究了单体与催化剂摩尔比、邻苯二甲酸酐(PA)加入量对4-乙烯基环氧环己烷(4-VCHO)聚合反应的影响。在[VCHO]∶[PA]∶[1]=250∶50∶1,90℃时本体聚合反应30min,收率达到49%,催化活性(TOF值)为245h-1,相对分子质量为22000,相对分子质量分布为2.1。对所得的聚乙烯基环氧环己烷(PVCHO)进行功能化修饰,依次将聚合物侧链双键转变为环氧基团、环状碳酸酯、羟基(-OH)、巯基(-SH)。PVCHO 侧链的环氧化和环状碳酸酯化使得其玻璃化转变温度分别提高了58℃和84℃。

    Abstract:

    The single crystal of L was obtained by solvent evaporation method, and its structure was analyzed by X-ray single crystal diffractometer. The Al complex 1 was formed from L and aluminum salt was prepared, and used as catalyst to be applied in the polymerization reaction of 1,2-epoxy-4-vinycyclohexane (4-VCHO). The effects of the mole ratio of monomer and catalyst and the amount of phathalic anhydride (PA) were studied. When the mole ratio of [VCHO]∶[PA] ∶[1] is 250∶50∶1, and the bulk polymerization takes 30 min at 90 ℃, the yield reaches 49%, TOF value is 245 h-1, the molecular weight is 22000, the molecular weight distribution is 2.1. The functional modification of polyethylene-based epoxy cyclohexane (PVCHO) was performed, and the double bonds on polymer side chains were converted to epoxy group, cyclic carbonate, -OH and -SH. The epoxidation and cyclic carbonatation of PVCHO side chains can make the glass transition temperature of polymers increase 58 ℃ and 84 ℃, respectively.

    参考文献
    相似文献
    引证文献
引用本文

许云鹏,贾 涛,黄 杰,段中余,刘宾元.[ONSO]AlCl配合物催化4-乙烯基环氧环己烷聚合制备聚醚及其功能化[J].高分子材料科学与工程,2019,35(8):22-29. Yunpeng Xu, Tao Jia, Jie Huang, Zhongyu Duan, Binyuan Liu. Preparation and Functionalization of Polyether Prepared by 1,2-Epoxy-4-Vinycyclohexane Catalyzed by [ONSO] Al Complex[J]. Polymer Materials Science & Engineering,2019,35(8):22-29.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-09-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司