可注射改性羧甲基纤维素水凝胶的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

西南科技大学科研基金(17zx7121);西南科技大学国家绝缘材料工程技术研究中心基金(16kfjc02);西南科技大学龙山学术人才科研支持计划(18LZXT01)


Preparation and Properties of Injectable Carboxymethyl Cellulose Based Hydrogels
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对羧甲基纤维素(CMC)进行巯基接枝改性,制备了羧甲基纤维素衍生物(CMC-SH),采用溶解氧或H2O2 氧化巯基(-SH)形成双硫键(-S-S-)的方法,化学交联制备了CMC-SH10、CMC-SH20和CMC-SH30系列可注射羧甲基纤维素基水凝胶,并对水凝胶的流变学性能以及在37℃的磷酸盐缓冲溶液(PBS)中的溶胀率、降解行为、体外药物释放行为进行了研究。结果表明,系列CMC-SH 水凝胶具有较好的流变学性能,CMC-SH30水凝胶的储能模量(G′)和屈服应力(τ)分别达到2873Pa和9328Pa;在37℃的PBS溶液中,系列水凝胶均能快速达到溶胀平衡,8h溶胀率介于22~29之间;均具有较好的稳定性,13d降解率为28%~48%;药物模型牛血清蛋白(BSA)5d的累积释放率为45%~59%,对BSA具有较好的控释能力。总体而言,前驱体浓度越高,CMC-SH 水凝胶的综合性能越好,系列水凝胶均具有较好的综合性能,其中CMC-SH30水凝胶的综合性能更好,有望应用于中短期蛋白类等大分子药物传输领域。

    Abstract:

    Thiolated carboxymethyl cellulose (CMC-SH) was synthesized with sodium carboxymethyl cellulose (CMC) utilizing sulfydryl grafting, and a series of injectable carboxymethyl cellulose based hydrogels (CMC-SH10, CMC-SH20, and CMC-SH30 hydrogels) were prepared using thiolated carboxymethyl cellulose as precursor through chemical cross-linking via disulfide bonds by the oxidation of dissolved oxygen or H2O2. The rheological properties, swelling ratio, degradation behavior, and in vitro drug release behavior of CMC-SH hydrogels were investigated. The results show that the series of CMC-SH hydrogels exhibit appropriate rheological properties, the storage modulus (G′) and the yield stress (τ) of CMC-SH30 hydrogel are 2873 Pa and 9328 Pa, respectively. All hydrogels exhibit the fast swelling rate, high swelling ratio, good stability, and sustained drug controlled release ability. In PBS solution (pH7.4) at 37 ℃, the swelling ratio of the series of CMC-SH hydrogels ranges from 22 to 29 after incubating 8 h, the degradation percentage ranges from 28% to 48% after 13 d, and the in vitro cumulative release percentage of BSA from drug-loaded hydrogels ranges from 45% to 59% after 5 d. Overall, the series of injectable CMC-SH hydrogels exhibit a good comprehensive performance, and the comprehensive performances of CMC-SH hydrogels are improved with the increasing of the concentration of precursor solution, and the comprehensive performances of CMC-SH30 hydrogel are better than those of CMC-SH10 and CMC-SH20, signifying that these hydrogels could be potentially used in the fields of short- and medium-term macromolecular drug (such as protein, etc.) delivery.

    参考文献
    相似文献
    引证文献
引用本文

叶 旭,李 娴,申月琴,邓 双,张宇帆.可注射改性羧甲基纤维素水凝胶的制备及性能[J].高分子材料科学与工程,2019,35(8):75-81. Xu Ye, Xian Li, Yueqin Shen, Shuang Deng, Yufan Zhang. Preparation and Properties of Injectable Carboxymethyl Cellulose Based Hydrogels[J]. Polymer Materials Science & Engineering,2019,35(8):75-81.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-09-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司