杜仲胶/聚丁烯-1形状记忆复合材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省高等学校科技计划项目(J14LA12);国家自然科学基金青年基金资助项目(51303092)


Fabrication and Properties of Eucommia ulmoides Gum/Polybutene-1 Shape Memory Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以杜仲胶(EUG)和聚丁烯-1(PB-1)为原材料,通过物理机械共混和化学交联的方法制备具有双连续相结构EUG/PB-1形状记忆复合材料,探讨了共混比对材料硫化特性、物理力学性能、耐热性、微观形貌、形状记忆性能的影响。研究结果表明,当EUG/PB-1共混比由90/10变化至60/40时,交联程度有所降低;力学强度和硬度降低然而耐热性明显提高;形变率(Δε)、形状固定率(Rf)均呈上升趋势,而形状回复率(Rr)因交联程度降低略有下降,当共混比为80/20和70/30时,形状记忆性能较好。

    Abstract:

    A series of shape memory materials based on Eucommia ulmoides gum (EUG) and polybutene-1 (PB-1) were fabricated by physical and mechanical blending, and chemical crosslinking. The prepared EUG/PB-1 composites have co-continuous architecture and the effect of blending ratio on cure characteristics, physical and mechanical properties, heat resistance, crystallizing and melting behaviors, microstructure, shape memory properties was studied. The results show that when the blending ratio changes from 90/10 to 60/40, the crosslinking degree decreases; both the mechanical strength and hardness are declined while the heat resistance becomes better; the deformation rate (Δε) and shape fixity ratio (Rf) show an increasing trend, however the shape recovery ratio (Rr) is declined slightly due to the decrease in crosslinking degree. The composites exhibit excellent shape memory properties with the blending ratios of 80/20 and 70/30.

    参考文献
    相似文献
    引证文献
引用本文

王 彦,高 晗,夏 琳,辛振祥.杜仲胶/聚丁烯-1形状记忆复合材料的制备与性能[J].高分子材料科学与工程,2019,35(8):118-124. Yan Wang, Han Gao, Lin Xia, Zhenxiang Xin. Fabrication and Properties of Eucommia ulmoides Gum/Polybutene-1 Shape Memory Composites[J]. Polymer Materials Science & Engineering,2019,35(8):118-124.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-09-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司