Abstract:Polyethylene glycol-cuprous oxide (PEG-Cu2O) microcapsules were synthesized by glucose reduction-single condensation. Their structure and coating effect were verified by TEM and FT-IR. The antifouling coating samples were prepared by using PEG-Cu2O as antifouling agent and the PU/EP modified resin as matrix, and the coating hardness, impact resistance, tensile strength, shear strength, water absorptionand release property of the coating samples were tested and characterized. The effects of the type and amount of antifouling agents on the performances of the antifouling coatings were explored. The results show that the coatings using PEG-Cu2O microcapsulesas antifouling agent are greatly improved in coating hardness, impact resistance, tensile strength, shear strength, water absorption, sustained release effects and other performance when compared with coating samples using ordinary Cu2O. When the amount of PEG-Cu2O is increased to 40 phr, the microcapsules have a certain degree of weakening effect on the performances of antifouling coatings. Considering all aspects of the performances of the coating samples, it is determined that the best amount of PEG-Cu2O is 20 phr. Testing antifouling panels in shallow submergence for the selected excellent coatings was carried out, and it is found that the microcapsule coating with 20 phr PEG-Cu2O achieves an antifouling effect substantially equivalent to the commercial antifouling coating.