高强高韧环氧树脂的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(U166320084)


Preparation and Properties of High Strength and High Toughness Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以4-(4-羟基苯基)-2,3-二氮杂萘-1-酮(DHPZ)和环氧氯丙烷(ECH)为原料,苄基三乙基氯化铵为催化剂,设计合成了一种含有二氮杂萘酮结构的新型环氧树脂,并通过红外光谱和核磁共振氢谱证实其结构,测定其环氧值为0.30(记为ER30)。ER30在150~200 ℃范围内黏度为0.5 Pa·s,具有较好的加工流动性。将其与双酚A型环氧树脂(DGEBA)按照不同比例进行共混,以4-4′-二氨基二苯甲烷(DDM)为固化剂,固化后材料的力学性能较DGEBA有显著提升,当ER30与DGEBA树脂的质量比为3∶7时,冲击强度为61.24 kJ/m2,弯曲强度为156.43 MPa,分别提升了67%和46%,实现了本征增韧与增强。

    Abstract:

    It is well known that epoxy resins have poor mechanical properties in the aerospace field. A novel epoxy resin was prepared from 4-(4- hydroxyphenyl)-1- phthalazinone(DHPZ) and epichlorohydrin(ECH) using benzyl-triethylammonium chloride as catalyst. The structure of the novel epoxy resin was confirmed by FT-IR and 1H-NMR. It is called ER30 because the epoxy value is 0.30. ER30 has a viscosity of 0.5 Pa·s in the range of 150~200 ℃, which proves its good processing fluidity. ER30 was mixed with diglycidgl ether of bisphenol A(DGEBA) at different proportions using 4,4-diaminodiphenyl methane(DDM) as curing agent. The addition of ER30 significantly improves mechanical properties of the material. When the mass fraction of ER30 is 30%, the impact strength and the bending strength of the mixture are 61.24 kJ/m2 and 156.43 MPa, which is increased by 67% and 46%, respectively. The improvement of the intrinsic toughness is achieved.

    参考文献
    相似文献
    引证文献
引用本文

刘乐诗,张锋锋,戚 裕,蹇锡高,王锦艳.高强高韧环氧树脂的制备与性能[J].高分子材料科学与工程,2019,35(9):35-39. Leshi Liu, Fengfeng Zhang, Yu Qi, Xigao Jian, Jinyan Wang. Preparation and Properties of High Strength and High Toughness Epoxy Resin[J]. Polymer Materials Science & Engineering,2019,35(9):35-39.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司