流动场诱导成核剂TMC-300取向分布对聚乳酸性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

高分子材料工程国家重点实验室自主课题(sklpme2018-2-06)


Influence of Flow Field Induced TMC-300 Orientation on Performances of Poly (lactic acid)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚乳酸(PLA)分子链呈半刚性,结晶速率缓慢导致PLA 制品几乎都为非晶态或低结晶度态。制品的耐久性与韧性较差,极大地限制了其在工业领域的应用。文中首先添加高效有机成核剂TMC-300用以改善其结晶性能,研究了TMC-300含量对其成核效率的影响;随后利用多级拉伸复合应力场诱导TMC-300取向分布研究其对PLA 结晶及力学性能的影响。结果表明,TMC-300在多级拉伸复合应力场的诱导下沿流动方向取向分布,继而诱导PLA 片晶垂直其轴向方向生长,实现PLA片晶沿流动方向的高度取向。在PLA/1%TMC-300体系中,PLA的结晶度达到38%,拉伸强度及断裂伸长率分别达到了92MPa与32%。

    Abstract:

    Poly(lactic acid) (PLA) exhibits slow crystallization rate due to its semi-rigid molecular chains, which brings about the fact that almost all PLA products are amorphous or with low crystallinity. The durability and toughness of the products are very poor, which greatly limits its application in the industrial field. In this paper, TMC-300 was added to improve the crystallization performance of PLA products. The effect of nucleating agent contents on the nucleating efficiency was studied. Subsequently, the TMC-300 orientation was induced by a special extensional flow field offered by the self-developed multi-stretch extrusion technology, and the influence of this induction on the crystallization and mechanical properties of PLA was studied. The results show that TMC-300 is oriented along the flow direction then induces the PLA lamellas to grow vertically along its axial direction, which at last realizes a high degree of the orientation of the PLA lamellas along the flow direction. In the PLA/1% TMC-300 system, the crystallinity of PLA reaches 38%, the yield strength and elongation at break reach 92 MPa and 32%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

彭爽娟,李春海,吴 宏,郭少云.流动场诱导成核剂TMC-300取向分布对聚乳酸性能的影响[J].高分子材料科学与工程,2019,35(9):109-113. Shuangjuan Peng, Chunhai Li, Hong Wu, Shaoyun Guo. Influence of Flow Field Induced TMC-300 Orientation on Performances of Poly (lactic acid)[J]. Polymer Materials Science & Engineering,2019,35(9):109-113.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司