混炼温度对杜仲胶/天然橡胶共混胶性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发项目计划(2017YFB0306902);国家自然科学基金资助项目(51573098,51703133)


Effect of Mixing Temperature on the Properties of Eucommia Ulmoides Gum /Natural Rubber Blend
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将杜仲胶(EUG)与天然橡胶(NR)按照一定的比例进行共混,研究不同的混炼温度对混炼胶及硫化胶性能的影响。通过橡胶加工分析仪(RPA)对体系中的炭黑分散性进行分析,利用差示扫描量热法(DSC)对体系中结晶进行表征,借助扫描电子显微镜(SEM)对硫化胶拉伸断面进行观察。结果表明,随着混炼温度的升高,混炼胶及硫化胶的结晶度逐渐降低,炭黑分散更加均匀,混炼胶硬度升高。当混炼温度在25~50 ℃范围内,随着混炼温度的降低,断裂伸长率和拉伸强度逐渐下降,100%定伸应力和300%定伸应力逐渐上升。通过DSC、SEM 和RPA分析,产生这一现象与EUG与NR的结合状态改变有关。

    Abstract:

    The eucommia ulmoides gum(EUG) and natural rubber (NR) were blended according to a certain ratio. The effects of different mixing temperatures on the mechanical properties of the rubber compounds and vulcanizates were investigated by changing the mixing temperature. The carbon black dispersibility in the system was analyzed by rubber processing analyzer (RPA). The internal crystal was characterized by differential scanning calorimetry (DSC). The tensile section of vulcanizate was observed by scanning electron microscopy (SEM). The results show that the crystallinity of the rubber compounds and vulcanizates decreases with the increase of the mixing temperature; the carbon black dispersion is more uniform; the Shore A hardness of rubber compounds also increases; when the mixing temperature is in the range of 25 ℃ to 50 ℃, as the mixing temperature decreases, the elongation at break and the tensile strength gradually decrease; the 100% modulus and 300% modulus increase gradually. The results of DSC, SEM and RPA demonstrate that this phenomenon can be attributed to the change of the binding state of EUG and NR.

    参考文献
    相似文献
    引证文献
引用本文

邹洪丽,康海澜,杨 凤,方庆红.混炼温度对杜仲胶/天然橡胶共混胶性能的影响[J].高分子材料科学与工程,2019,35(9):119-125. Hongli Zou, Hailan Kang, Feng Yang, Qinghong Fang. Effect of Mixing Temperature on the Properties of Eucommia Ulmoides Gum /Natural Rubber Blend[J]. Polymer Materials Science & Engineering,2019,35(9):119-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司