改性多层氧化石墨烯/二氧化硅材料的制备及对天然橡胶的增强作用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51663003);黔科合支撑[2017]2301;黔教研合JPKC字[2015]007


Preparation of Modified-Multilayer Graphene Oxide/Silica and Its Application in Reinforced Natural Rubber Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用乳液共混与机械剪切法制备改性多层氧化石墨烯(MGO)/二氧化硅(SiO2)/天然橡胶(NR)复合材料。采用红外光谱、X射线衍射、扫描电镜等方法分析了改性MGO/SiO2 的微观结构,研究了改性MGO/SiO2 互配填料对天然橡胶的增强作用。结果表明,经双偶联剂改性的MGO/SiO2 可以形成片球三维结构,可有效改善MGO 的层叠现象,并减小SiO2 粒子在橡胶基体中的分布粒径,提高填料与NR基体的界面相互作用,增加橡胶复合材料的结合胶含量,提高复合材料的综合力学性能。与MGO/SiO2(0/50)/NR复合材料相比,MGO/SiO2(3/47)/NR复合材料的拉伸强度、100%定伸应力和300%定伸应力分别提高了7%、50%、42%,耐切割实验的质量损失下降了43%。

    Abstract:

    The modified multi-layer graphene oxide (MGO)/silica (SiO2)/natural rubber composites were prepared by emulsion mixing and the mechanical blending method. The microstructure of modified MGO/SiO2 was characterized by FT-IR, XRD and SEM. The effects of modified MGO/SiO2 on the structure and performance of NR were studied. The results show that MGO/SiO2, which was co-modified by two kinds of coupling agents, can form a lamella-spheric structure, the practical distribution size of MGO/SiO2 is declined, the interface interaction is strengthened between MGO/SiO2 and the rubber matrix, the content of bound rubber increases evidently, overall mechanical properties of composite material are improved. Compared to the MGO/SiO2 (0/50)/NR composite, the tensile strength, modulus at 100% strain and modulus at 300% strain of the MGO/SiO2 (3/47)/NR composite are increased by 7%, 50% and 42%, respectively. The mass loss of the cutting test is reduced 43%.

    参考文献
    相似文献
    引证文献
引用本文

江 猛,熊玉竹,张清坡,王 倩,朱喻林,王魁业.改性多层氧化石墨烯/二氧化硅材料的制备及对天然橡胶的增强作用[J].高分子材料科学与工程,2019,35(9):134-141. Meng Jiang, Yuzhu Xiong, Qingpo Zhang, Qian Wang, Yulin Zhu, Kuiye Wang. Preparation of Modified-Multilayer Graphene Oxide/Silica and Its Application in Reinforced Natural Rubber Composites[J]. Polymer Materials Science & Engineering,2019,35(9):134-141.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司