明胶-海藻酸钠制备薄荷油微胶囊的工艺优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2017YFB0309100)


Optimization of Preparation Technology of Peppermint Oil Microcapsules in Gelatin-Sodium Alginate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中对以明胶和海藻酸钠为壁材,薄荷油为芯材用复凝聚法制备微胶囊的工艺进行了优化,通过对2种壁材复凝聚行为和微胶囊化工艺参数的优化,得到了最佳制备工艺:复凝聚pH 值为4.3,明胶与海藻酸钠的质量比为4∶1,乳化剂体积分数为0.5%,均质时间为9min,壁材浓度1.75%,复凝聚速度为600r/min。经过优化后的微胶囊形态良好,为完整规则的圆球形,壁材对芯材包埋良好,产率为85.64%,含油率为50.00%,壁材利用率为78.75%,经热重(TG)测试表明,相比150℃以内就能完全损失的纯薄荷油,制得的薄荷油微胶囊在250℃以下可在外壳的保护作用下使内部薄荷油达到缓慢释放,从而赋予薄荷油良好的热稳定性。

    Abstract:

    The optimisation of peppermint oil microcapsules with gelatin (GE) and sodium alginate (SA) as wall-material through complex coacervation was studied. The final optimized technology was achieved by the coacervation and microencapsulation behaviour study. And the specific parameters are as follows: pH of 4.3, mass ration of GE and SA of 4∶1, volume fraction of emulsifier 0.5%, homogenization time of 9 min, wall-materials concentration of 1.75%, coacervation stirring speed of 600 r/min. It’s found that the microcapsules under the optimum preparation conditions have satisfying morphology which appear in a perfectly regular round ball with the encapsulation yield of 85.64%, payload of 50.00% and utilization ratio of wall-materials of 78.75%. The result of thermal gravimetric (TG) analysis shows that the peppermint oil with the protection of wall-materials of the microcapsule has good thermal stability which achieves the slow release under 250 ℃ compared to the peppermint oil without any protection that almost completely losses within 150 ℃.

    参考文献
    相似文献
    引证文献
引用本文

李宏英,王鸿博,傅佳佳,王文聪.明胶-海藻酸钠制备薄荷油微胶囊的工艺优化[J].高分子材料科学与工程,2019,35(9):142-149. Hongying Li, Hongbo Wang, Jiajia Fu, Wencong Wang. Optimization of Preparation Technology of Peppermint Oil Microcapsules in Gelatin-Sodium Alginate[J]. Polymer Materials Science & Engineering,2019,35(9):142-149.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司