含悬垂双键聚酯醚的一步法合成及改性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省自然科学优秀青年基金资助项目(BK20170056)


One-Pot Synthesis and Modification of Poly(ester-ether) with Pendant Vinyl Bonds
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚己内酯(PCL)与烯丙基缩水甘油醚 (AGE)为反应物,利用膦腈碱t-BuP4同时催化酯交换反应和阴离子开环反应,制备含悬垂双键的聚酯醚。在此基础上,通过“巯基-双键”点击化学反应对合成的聚合物进行改性,得到侧链含羟基的可降解聚酯醚。通过核磁共振、三检测凝胶渗透色谱、差示扫描量热等对聚合物进行结构分析和表征。结果表明AGE既能被t-BuP4催化发生开环反应,也能同时与PCL发生酯交换反应,最终形成主链含悬垂双键的聚酯醚。当PCL中CL结构单元与单体AGE的摩尔比为2∶1时,所得共聚物的相对分子质量从8.2×103增加到9.5×103,结晶度也由61.6%降低到31.1%。共聚物中AGE链段的含量始终与投料比接近,其悬垂双键能够成功被2-巯基乙醇改性,制备侧链含羟基的可降解聚酯醚。

    Abstract:

    Poly(ε-caprolactone) (PCL) and allyl glycidyl ether (AGE) were employed to synthesize the biodegradable poly(ester-ether) with the pendant vinyl bonds by the t-BuP4-catalysed transesterification reaction and anion ring-opening polymerization. The resulting copolymer was post modified by the “thiol-ene” click chemistry and characterized through nuclear magnetic resonance spectroscopy, three-detector gel permeation chromatography and differential scanning calorimetry. The results show that AGE could successfully incorporate into the PCL backbone chains. When the feed ratio of CL in PCL to AGE is 2∶1, the molecular weight of the resulting copolymer increases from 8.2×103 to 9.5×103, meanwhile, its degree of crystallinity decreases from 61.6% to 31.1%. The pendant double bonds of the resulting copolymer could be further modified by the reaction with mercaptoethanol.

    参考文献
    相似文献
    引证文献
引用本文

杨宏军,柴晨琼,宋肄业,张佳栋,黄文艳,薛小强,蒋其民,蒋必彪.含悬垂双键聚酯醚的一步法合成及改性[J].高分子材料科学与工程,2019,35(10):15-19. Hongjun Yang, Chenqiong Chai, Yiye Song, Jiadong Zhang, Wenyan Huang, Xiaoqiang Xue, Qimin Jiang, Bibiao Jiang. One-Pot Synthesis and Modification of Poly(ester-ether) with Pendant Vinyl Bonds[J]. Polymer Materials Science & Engineering,2019,35(10):15-19.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司