聚醚醚酮物理老化行为与成型模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金重点项目(11432003);863计划项目(2015AA033803);中央高校基本科研业务项目(DUT17LK08);辽宁省教育厅重点实验室基础研究项目(LZ2015016);111引智计划(B14013)


Physical Aging Behavior of Poly-Ether-Ether-Ketone and Molding Simulation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对注塑成型聚醚醚酮(PEEK)试样进行人工加速物理老化实验,得到试样屈服应力随物理老化时间的变化规律,以132 ℃为参考温度最终拟合得到以PEEK屈服应力为表征的物理老化模型。基于此模型并结合时温等效原理,预测PEEK注塑成型及后期物理老化过程中的屈服应力变化,并通过实验进行了验证。

    Abstract:

    In this paper, the accelerated physical aging tests were performed on the injection-molded poly-ether-ether-ketone (PEEK) tensile samples, and the variation law of the yield stress of the samples with physical aging time was derived. Through data fitting, the physical aging model of PEEK based on the evolution of yield stress can be obtained at the reference temperature of 132 ℃. Finally, based on this model and combined with the temperature equivalent principle, the yield stress evolution of PEEK samples during injection molding and the following physical aging process can be predicted, and the predictions were verified by experiments.

    参考文献
    相似文献
    引证文献
引用本文

常旭阳,王新宇,李 征,谷俊峰,阮诗伦,申长雨.聚醚醚酮物理老化行为与成型模拟[J].高分子材料科学与工程,2019,35(10):131-137. Xuyang Chang, Xinyu Wang, Zheng Li, Junfeng Gu, Shilun Ruan, Changyu Shen. Physical Aging Behavior of Poly-Ether-Ether-Ketone and Molding Simulation[J]. Polymer Materials Science & Engineering,2019,35(10):131-137.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2019-12-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司